Wednesday, August 23, 2017

Terminal block pluggable 2 pin Male pitch 3.50mm

Pluggable 2 pin (male) block terminals with pitch distance of 3.5 mm. Terminal block is able to work at a maximum voltage of 300 VAC and current of 12 A.

  • Terminal type Terminal block
  • Male (male / female) form
  • 3.5 mm pitch
  • Pin number 2 Pin
  • Mounting DIP
  • Copper Alloy contact material
  • Flow 12 A
  • UL94V-0 packaging materials

Terminal block pluggable 2 pin Female pitch 3.50mm

Pluggable 2 pin terminals (female) with pin spacing (pitch) of 3.5 mm. Terminal block is able to work at a maximum voltage of 300 VAC and current of 12 A.


  • Terminal type Terminal block
  • Shape (female / male) Female
  • 3.5 mm pitch
  • Pin number 2 Pin
  • Mounting DIP
  • Copper Alloy contact material
  • Flow 12 A (max)
  • UL94V-0 packaging materials

EYGA091202DM PGS 17uM Therma Interface Film

PGS (Pyrolytic Graphite Sheet) is a very thin synthetic heat absorption layer, has high thermal conductivity, and is made from high quality Graphite Polymer Film material that can absorb heat quickly and efficiently. PGS is ideal for heat management and absorption applications in electronics components of varying sizes, because PGS is so thin and flexible that it can be cut according to the size of the electronics component to be absorbed by heat.

Specification:
- Density: 2.10 g / cm cubic
- Thickness: 0.017 ± 0.005 mm
- Thermal Conductivity: 1850 W / (m.k)
- Electric Conductivity: 20000 S / cm
- Extensional Power: 40 MPa
- Heat Resistance: 400 ° C
- bending: 10,000 cycles

DIP Switch IC 1 position

DIP Switch 1 position with maximum working voltage 25 V and current 25 mA. Information on the drawing / full dimensions can be seen in the datasheet.


  • Pin number 2 Pin
  • Configure SPST
  • Type DIP Switch
  • On - Off Logic

Friday, August 18, 2017

Bio-ML10D Fingerprint Lock

Bio-ML10D is a smart door lock that has been integrated with fingerprint scanner / fingerprint scanner technology. This device is designed with the concept of DIY (Do It Yourself) so that users can install and modify the device easily because in technical installation does not require complicated wiring. This device uses a German-standard mortise with a hook and a latch in it.

Features:
- Use the latest generation of fingerprint identification algorithms
- Sleek, sleek, and compact design
- using a German-standard mortise with a hook and a latch in it.
- User data will remain in memory even if the power supply is turned off
- Equipped with infrared sensor - touch to open
- Equipped with emergency locks
- Equipped with buzzer and LED indicator
- Equipped with a back-up power supply terminal for 9 V batteries
- Equipped with low battery notification
- Easy to set up and use
- Simple cabling
- Supports 3 types of users - Admin, Normal Users and Temporary Users


Specification:
- Power Supply: 4x AA battery @ 6 VDC
- Material: Zinc Alloy
- User Capacity: 10 admins, 60 casual users, 20 temporary users
- Working Temperature: 0 ° C - 45 ° C
- Emergency Lockscrew: Mechanical Lock and 9V Battery
- Dimensions: 69 × 155 × 35 mm (front) / 69 × 155 × 25 mm (rear)

AD70032 1.382 ppm Calibration Solution 20ml

AD70032 is a calibration fluid for Total Dissolved Solid (TDS) meters. The calibration liquid has a particle concentration of 1382 ppm and 20 ml net and packed in sachet packs that are very easy to carry anywhere. This fluid serves to calibrate the probe on the TDS meter so that the reading results match the fluid characteristics to be measured.

Specification:
- Net: 20 ml
- Concentration: 1382 ppm
- Condition / Parameter: 25 ° C / 77 ° C
- Weight: 43.8 gr

AD70031 1.413 uS/cm Calibration Solution 20ml

AD70031 is a calibration fluid for conductivity meter device. This calibration fluid has a particle concentration of 1413 μS / cm and 20 mm net, and is packed in sachet packaging making it easy to carry anywhere.

Specification:
- Net: 20 ml
- Concentration: 1413 μS / cm
- Condition / Parameter: 25 ° C / 77 ° F
- Weight: 21.6 gr

CT-8022 Digital ORP Redox Meter

CT-8022 Digital ORP Redox Meter is a versatile ORP measurement device that can be used to measure the acidity (pH) and redox (oxidation reduction) of a liquid. This device will display the ORP and temperature values ​​in a stimultaneous way through the available LCD panels. It is stable, accurate and easy to use, making it ideal for applications in the fields of chemistry, medicine, electronics, food, animal husbandry, and industry.

Specification:
- Working Voltage: 6 V
- Display: LCD
- Measuring range: ± 1200 mV
- Accuracy: 1 mV
- Resolution: 1 mV
- Working Temperature: 0 ° C ~ 50 ° C
- Correction: 2:00 auto correction (calibrated by the manufacturer, so it can be directly used by the user)
- Dimensions: 188 x 38 mm
- Equipped with auto-shutdown feature (10 minutes) to save power usage
- Equipped with a low battery reminder indicator
- Equipped with celenius converter to farenheit
- Equipped with portable box so easy to carry everywhere

Thursday, August 17, 2017

MTL-S070-D-ODROIDX 7inch MTLD Package for ODROID-X/X2

MTL-S070-D-ODROIDX is a LCD display compatible with mini PC ODROID X / X2. The LCD has a panel width of 7 "with an optimum WSVGA resolution (1024 x 600) .This LCD panel also features touch screen and multi-touch capabilities that support up to 10 different touch points.In addition to the sales package has also been accompanied by an anti coating Additional scratches that work to protect your LCD panel from unwanted scratches.

Specification:
- Type: Capacitive
- Screen Width: 7 inches
- Resolution: 1024 x 600
- Multi touch: Yes, up to 10 touch points
- LCD Driver: Yes, available in sales package
- Compatibility: ODROID X / X2


Completeness:
- 1x Touchsccreen LCD panel
- 1x LCD Driver
- 1x Flat cable
- 1x Extra scratch coating

Tuesday, August 15, 2017

GP1S52 Photointerrupter gap 3mm

Photointerrupter Sharp
Specification:
- Transmitter Power: 1.25VDC
- transmitter current: 20mA (typ)
- Ic: 20mA
- Vce sat: 0.4VDC
- Respone time: tr 3μs / tf 4μs
- Output: phototransistor
- Distance Tx and Rx: 3mm
- Packaging: 12.2 x 10 x 5mm