Wednesday, February 29, 2012

PC usb Logic Analyzer LA5034 by HANTEK

Up to 34 data input channels,High speed operation 500MHz,Continuously variable pre/post trigger position,Advanced Multi-Level Triggering,+6V to -6V Adjustable Logic Threshold, CAN, I2C, SPI and RS232 Interpreters, Built-in 250MHz Frequency Counter.

Operating system: Windows 2000, Windows XP, VISTA, Windows 7

Characteristic

  •  Up to 34 data input channels.
  •  High speed operation ,500MHz Timing-Mode (Internal Clock),200MHz State-Mode (External Clock)
  •  Continuously variable pre/post trigger position,Advanced Multi-Level Triggering
  •  +6V to -6V Adjustable Logic Threshold
  •  CAN, I2C, SPI and RS232 Interpreters
  •  Built-in 250MHz Frequency Counter
  •  USB 1.1 and 2.0 Compatible


Hardware Specification


Sampled channels
34
High input impedance
200K (C=10p)
Input voltage range
-60V~60V
Logic threshold Range
-6V~6V
Max Sample Rate
500 MHz
Max input Signal bandwidth
150 MHz
Min time resolution
2ns
Sample Depth
2KSample
Storage depth 
68Kbits
Max record timeCompression mode
10hour
Max Sample Rate
(Compression mode
200 MHz
Triggers Max rate
250 MHz
Compatible input
TTL,LVTTL,CMOS,LVCOMS,ECL,PECL,EIA
Electrostatic Protected
15KV
Power
USB Port
Temperature range
-10~60




Lutron AM4206 ANEMOMETER, air flow + air velocity

Lutron (made in Taiwan) ANEMOMETER, air flow + air velocity ,Model : AM-4206 .
specs:
* CMM (m3/min.), CFM (ft3/min.)
* m/s, ft/min, km/h, mile/h, knots, Temp.(oC/oF).
* 0.4 to 25.0 m/s., -P circuit.
* Max., Min., Memory recall button.
* Size : 180 x 72 x 32 mm. RS-232.

DEKKO AM4836V Professional DIGITAL ANEMOMETER

DEKKO AM4836V Professional DIGITAL ANEMOMETER


Tech Spec:

  • Multi-functions Thermo Anemometer with º C & º F
  • Wind Speed or Air Velocity : 0.40 - 45.0 m/ s ( km/ hr, ft/ min, knots)
  • Accuracy : ± ( 2% + 0.1 m/ s)
  • Wind or Air Flow
  • CMM ( cubic meters / min) : 0 - 9999 m3/ min
  • CFM ( cubic ft/ min) : 0 - 9999 ft3 / mi
  • Wind or Beaufort Scale : 0 - 12 level
  • Wave Height : 0 - 14m
  • Wind or Air Temperature : 0 to 60 º C ( 32 to 140 º F)
  • Data Hold : Maximum Value
  • Memory : 24 group data
  • Automatic Power Off : 0-9 minutes set by users
  • Display : 0.5" ( or 13mm) 4-digit LCD

Monday, February 27, 2012

Mini2440 | S3C2440 ARM9 Board

FriendlyARM Mini 2440 SBC (Single-Board Computer) with 400 MHz Samsung S3C2440 ARM9 processor. The board measures 100 x 100 mm, ideal for learning about ARM9 systems.

Specification

  • Dimension: 100 x 100 mm
  • CPU: 400 MHz Samsung S3C2440A ARM920T (max freq. 533 MHz)
  • RAM: 64 MB SDRAM, 32 bit Bus
  • Flash: 64 MB / 128 MB / 256 MB / 1GB NAND Flash and 2 MB NOR Flash with BIOS
  • EEPROM: 256 Byte (I2C)
  • Ext. Memory: SD-Card socket
  • Serial Ports: 1x DB9 connector (RS232), total: 3x serial port connectors
  • USB: 1x USB-A Host 1.1, 1x USB-B Device 1.1
  • Audio Output: 3.5 mm stereo jack
  • Audio Input: Connector + Condenser microphone
  • Ethernet: RJ-45 10/100M (DM9000)
  • RTC: Real Time Clock with battery (CR1220)
  • Beeper: PWM buzzer
  • Camera: 20 pin (2.0 mm) Camera interface
  • LCD Interface: 41 pin (1.0 mm) connector for FriendlyARM Displays and VGA Board
  • Touch Panel: 4 wire resistive
  • User Inputs: 6x push buttons and 1x A/D pot
  • User Outputs: 4x LEDs
  • Expansion: 40 pin System Bus, 34 pin GPIO, 10 pin Buttons (2.0 mm)
  • Debug: 10 pin JTAG (2.0 mm)
  • Power: regulated 5V (DC-Plug: 1.35mm inner x 3.5mm outer diameter)
  • Power Consumption: Mini2440: 0.3 A, Mini2440 + 3.5" LCD: 0.6 A, Mini2440 + 7" LCD: 1 A
  • OS Support: Windows CE 5 and 6 , Linux 2.6, Android.

Friday, February 24, 2012

Analog Multitester CX506a by SANWA

Analog Multitester CX506a by SANWA


General Information

  • High sensitivity (DC50kΩ) meter
  • 26ch switch, wide range measurement
  • Capacitance measurement by built-in transistor oscillator 50pF~2000μF
  • Transistor check function
  • Switchable DC polarity
  • Bandwidth : 40Hz~30kHz (3V and 12V), 40Hz~10kHz (30V range)


Standard Accessories Included
Test lead (TL-21) x 1set
Spare fuse x 1
Alligator clip lead (CL-506)