Thursday, October 31, 2013

Coin tag 30mm diameter work at 125KHz

Coin tag 30mm diameter work at 125KHz with GK4001 chip

short desc:
- keychain rfid that work on 125KHz
- read range up to 60mm
- format GK4001 / chip
- 64 bit data
-53mmx27mmx2mm


Keychain tag - more rfid checkout http://rfid.rosesana.com

Wednesday, October 30, 2013

Low cost Digital Thermo-hygrometer CADIK 308

CADIK 308 (made in Taiwan) with indoor / outdoor thermometer function

General Specifcation:
selectable degC or degF display
humidity and comfortable display
max/min temperature and humidity display
indoor temperature measure range: -50deg C (-58deg F) to +70deg C (158deg F)
outdoor temperature measure range: -50deg C (-58deg F) to +70deg C (158deg F)
temperature resolution 0.1 deg C
temperature accuracy: +/- 1 deg C for -20 degC (-4deg F) to 50 deg C (+122 deg F) , otherwise +/- 2deg C
humdity measure range: 20% RH to 90% RH (display between 15% RF to 95% RH.)
humidity resolution 1%
humidity accuracy +/- 5%
supply: 1.5V battery

Tuesday, October 29, 2013

Winbot 730 Window Cleaning Robot

The Winbot 730 Window Cleaning Robot is the world's only window cleaning robot that can clean glass of any thickness – even Thermopane windows. The Winbot W730 is equipped with a frameless window detection system so you can clean glass doors, railings and shower stalls with ease.

• Winbot 730 window cleaning robot
• Cleans glass of any thickness
• Outstanding cleaning efficiency and easy to use
• Extraordinary safety protection with user-friendly design
• 11.1 V lithium rechargeable back-up battery

Features:
• Winbot is Easy to Use
Winbot is so easy to use. Switch the robot ON, place it on the window, and press start. It's that easy. Now you can sit back, relax and let winbot do the work.

• Automated Cleaning Path
Winbot automatically determines the size of your window, then programs a path to clean the window quickly and efficiently.

• Extra Safety Protection
If Winbot is used to clean a window above ground level, the Safety Pod provides an extra layer of protection.

• Dual Suction Rings for Safety Protection
Winbot is equipped with dual suction rings. If the outer ring senses any loss of suction, a signal will be sent to Winbot's ''brain'' to reverse direction and select a new path.
Specs:
• Size: 232 x 225 x 95 mm
• Net Weight (Kg): 2
• Color: Pearl White
• Frameless Identification: Can be used to clean frameless windows such glass doors, etc
• Charging Time (H): 2
• Battery: 11.1 V lithium rechargeable back-up battery
• Battery Capacity (mAh): 400
• Working Speed (m/s): 0.15
• Power Adapter (m): 3
• Working Noise (db): 55
• Remote Control: Yes
• Cleaning Pads (Set): 2

iRobot Braava™ 380t Floor Mopping Robot

The new iRobot Braava 380t Floor Mopping Robot dry and damp mops your floors for you using disposable or reusable microfiber cleaning cloths. Featuring a longer-lasting battery, Turbo Charge Cradle, cube-to-cube navigation and the Pro-Clean System, Braava 380t is able to clean larger or multiple rooms in a single cleaning cycle.


IROBOT BRAAVA™ 380T FULL SPECIFICATIONS


Featuring a longer-lasting battery, Turbo Charge Cradle, cube-to-cube navigation and the Pro-Clean System, the new iRobot Braava 380t is able to mop larger or multiple rooms in a single cleaning cycle.

Dry and Damp Mops Hard-Surface Floors Featuring Pro-Clean System
Braava 380t dry and damp mops floors for you. With the Pro-Clean System, a special Reservoir Cleaning Pad dispenses liquid throughout the cleaning cycle to keep the cloth damp.
Dry Mop Mode: Moves in straight lines back and forth to efficiently and thoroughly pick up dust, dirt and hair.
Mop Mode: Uses a special back-and-forth mopping action and damp cleaning cloths to pull deeper dirt and grime off your floors.
Disposable Or Microfiber Cleaning Cloths: Works with either disposable cleaning cloths or our reusable microfiber cloths.
Pro-Clean System Cleaning Solutions: Fibers on the reusable Pro-Clean cloth attract and trap dirt, oils and grime from the floor, so you can clean effectively using just water or mild cleaning solutions.
Floor Types: Braava cleans all hard-surface floors including tile, vinyl, hardwood and laminate.


Tracks Where It Cleans To Ensure Complete Coverage
Braava 380t's NorthStar® Navigation System helps the robot keep track of where it has been and where it needs to go. In a single cleaning cycle, Braava 380t dry mops up to 1,000 square feet and damp mops up to 350 square feet.
Cube-To-Cube Navigation: For bigger homes, additional NorthStar Navigation Cubes can be purchased to expand the robot's dry mopping capabilities up to 2,000 square feet in a single cycle.
Compact Size: Braava can clean under sofas and tables and get into tight areas.
Wall-Following Technology: Braava cleans dust and dirt right along walls, baseboards and edges.
Soft-Touch Bumper: Bumper cushions the contact made between Braava and walls, furniture and other objects.
Smart Sensors: Sensors help Braava avoid stairs, area rugs and raised transitions to carpets.


Makes Floor Mopping Hassle-Free From Beginning To End
Just attach a cleaning cloth to the removable magnetic cleaning pad, set Braava down and press either the Sweep button for dry mopping or the Mop button for damp mopping. When using the Pro-Clean System, the detachable Reservoir Pad fills and empties easily over the sink.
Longer-Lasting 2000 mAh NiMH Rechargeable Battery: Cleans for up to four hours dry mopping or two and a half hours damp mopping on a single charge.
Turbo Charge Cradle: Charges Braava 380t in as fast as two hours, providing convenient storage space.
Whisper-Quiet: Braava cleans your floors for you without disrupting your daily activity or sleep.
Pause/Resume: Braava retains a map of its cleaning space so you can replace the cleaning cloth mid-cycle.
Returns To Where It Started: When Braava is done cleaning, it returns to where it started and powers down automatically.


What's In The Box:
1 iRobot Braava 380t Floor Mopping Robot
1 NA Adapter
1 2000 mAh NiMH Rechargeable Battery
1 NorthStar Navigation Cube, Channel 4 (requires 2 C batteries, included)
1 Microfiber Mopping Cloth, 1 Microfiber Damp Mopping Cloth
1 Multi-Purpose Cleaning Pad
1 Pro-Clean Reservoir Pad
1 Turbo Charge Cradle


Specifications: 
Package Dimensions: 15 x 4.5 x 13 inches
Package Weight: 8.7 pounds
Robot Dimensions: 3 x 8.5 inches
Robot Weight: 4 pounds
The iRobot limited warranty shall not apply to failures or problems which are caused by products or equipment not authorized by iRobot Corporation.

Neato XV Signature Pro Professional grade cleaning.

Advanced laser guided navigation and powerful suction ensures your Neato goes automatically from room to room, cleaning close to edges, in corners, and carefully around furniture. It returns to the charge base and resumes where it left off! It offers easy scheduling of daily cleaning or a button for instant cleaning. The versatile brush system offers superior pick-up of pet hair, dander and fiber on all floor types. The special filters retain more than three times the amount of fine dust particles as standard filters, which is perfect for removing allergens from the home.



Features:


  • The strongest suction available in a robot vacuum. Versatile brush system for superior cleaning on all floor types – carpet, hard wood and tile.
  • Advanced laser guided navigation featuring Smart Sensor technology. Robot software can be upgraded when new features become available.
  • Two high performance filters. Best choice for reducing dust and allergens.
  • Control center makes it easy to schedule daily cleanings or spot clean instantly.
  • Weight 8.6 lbs
  • Dimensions 12.5 × 13 × 4 in
What's In The Box
  • XV Signature Pro Robot Vacuum
  • Charging Station
  • Charging Cable
  • 6’ Boundary Marker
  • 2 Brushes
  • 2 Pet & Allergy Filters
  • Quick Start Guide
  • User Guide

iRobot Scooba® 390 Floor Washing Robot

With a simplified design and longer battery life, the Scooba 390, our premium floor washing robot, builds on the best of the Scooba product line. Using a four-stage cleaning process, Scooba preps, washes, scrubs and squeegees your floor for you, removing up to 98% of common household bacteria*. No sweeping required. And unlike a mop, Scooba never uses dirty water to wash your floors.


IROBOT SCOOBA® 390 FULL SPECIFICATIONS

Scooba 390 Core Technologies:
Thorough Cleaning:
  • Uses a powerful four-stage cleaning process to prep, wash, scrub and squeegee your floors, removing up to 98% of common household bacteria*
  • No sweeping required! Scooba preps your floor, vacuuming up loose crumbs, sand and dirt
  • Puts down only fresh solution to clean your floors, keeps clean and dirty water separate inside the robot
  • Safe and effective on select hard floor surfaces, including tile, linoleum, vinyl, marble, slate, stone and sealed hardwood
  • Works with Scooba Hard Floor Cleaner, Natural Enzyme Formula, water or water and vinegar

Complete Coverage:
  • Wide cleaning head makes Scooba 390 ideal for kitchens and other large areas
  • One full tank washes up to 425 square feet before it requires refilling
  • Makes at least three passes over every area for thorough cleaning
iAdapt™ Responsive Cleaning Technology:
  • Scooba's advanced system of software and sensors allows it to sense its environment to clean more of your room, more thoroughly
  • With iAdapt Technology, Scooba cleans every section of your room multiple times
  • Scooba selects from dozens of robotic behaviors more than 60 times per second to optimize coverage of every section of your room
  • Wall-Following ensures the most thorough floor coverage possible
  • Cliff detection sensors allow Scooba to avoid stairs and other drop-offs
Added Convenience:
  • Easy to use: just fill and then at the push of a button Scooba is off and running
  • For regular maintenance, all parts that need to be cleaned or maintained are colored grey and orange
  • Features Extended Life Power Management to deliver longer battery life than previous Scooba models
  • Virtual Wall® Technology keeps the robot in the areas you want to clean and out of the ones you don't
What's In The Box:
  • 1 Scooba 390 Floor Washing Robot
  • 1 Rechargeable Battery
  • 1 Battery Charger
  • 1 Virtual Wall (Requires 2 D batteries, not included)
  • 1 Suction Bulb
  • 4 Packets Of Scooba Hard Floor Cleaner, Natural Enzyme Formula
  • One-year manufacturer's limited warranty on robot, six-month manufacturer's limited warranty on battery
Specifications:
  • Package Dimensions: 21.3 x 17 x 5.2 inches
  • Package Weight: 13 lbs.
  • Robot Dimensions: 14.8 inches in diameter, 3.6 inches in height
  • Robot Weight: 8.6 lbs.

*When used as directed, laboratory testing results indicate removal of Escherichia coli and Staphylococcus aureus bacteria after two passes of the Scooba floor washing robot. Individual results may vary.

The iRobot limited warranty shall not apply to failures or problems which are caused by products or equipment not authorized by iRobot Corporation.

Allegro ACS756SCA-100B-PFF-T hall effect current sensor

ACS756SCA-100B-PFF-T Fully Integrated, Hall Effect-Based Linear Current Sensor IC with 3 kVRMS Voltage Isolation and a Low-Resistance Current Conductor

The Allegro ACS756 family of current sensor ICs provides economical and precise solutions for AC or DC current sensing in industrial, automotive, commercial, and communications systems. The device package allows for easy implementation by the customer. Typical applications include motor control, load detection and management, power supplies, and overcurrent fault protection. 

The device consists of a precision, low-offset linear Hall circuit with a copper conduction path located near the die. Applied current flowing through this copper conduction path generates a magnetic field which the Hall IC converts into a proportional voltage. Device accuracy is optimized through the close proximity of the magnetic signal to the Hall transducer. 

A precise, proportional voltage is provided by the low-offset, chopper-stabilized BiCMOS Hall IC, which is programmed for accuracy at the factory. 

The output of the device has a positive slope (>VCC/ 2) when an increasing current flows through the primary copper conduction path (from terminal 4 to terminal 5), which is the path used for current sampling. The internal resistance of this conductive path is 130 μΩ typical, providing low power loss. 



Features and Benefits

  • Industry-leading noise performance through proprietary amplifier and filter design techniques 
  • Total output error 0.8% at TA= 25°C 
  • Small package size, with easy mounting capability 
  • Monolithic Hall IC for high reliability 
  • Ultra-low power loss: 130 μΩ internal conductor resistance
  • 3 kVRMS minimum isolation voltage from pins 1-3 to pins 4-5 
  • 3.0 to 5.0 V, single supply operation
  • 3 μs output rise time in response to step input current 
  • 20 or 40 mV/A output sensitivity
  • Output voltage proportional to AC or DC currents
  • Factory-trimmed for accuracy
  • Extremely stable output offset voltage 
  • Nearly zero magnetic hysteresis

uLCD-32PTU-PI 3.2" LCD Pack for Raspberry Pi w/ Adaptor Shield + Cable

uLCD-32PTU-PI 3.2" LCD Pack for Raspberry Pi w/ Adaptor Shield + Cable
  • Powerful Graphics
  • Low-Cost Display Solution
  • Easily Connect to your Raspberry Pi

The uLCD-32PTU-PI is a Raspberry Pi Display Module Pack, which includes a uLCD-32PTU 3.2" LCD Display with Resistive Touch, a 4D Pi Adaptor and 5 way interface cable.

The uLCD-32PTU-PI customises the uLCD-32PTU Display specifically for interfacing with the Raspberry Pi, to provide a quick and easy interface without any wiring hassles.

The Raspberry Pi Display Module Pack enables a Raspberry Pi user to quickly connect the 4D Pi Adaptor Shield to their Raspberry Pi, connect the 5 way cable between the Adaptor and the Display Module, and be connected in seconds to start programming their new 4D Systems Display.

The uLCD-32PTU-PI has a comprehensive ViSi-Genie library written to communicate with the Raspberry Pi, allowing the Visi-Genie events to be easily understood by the Raspberry Pi and users code.

Utilises the Raspberry Pi's UART Serial Port.

Note: This 4D display will NOT function as the Primary Display for the Raspberry Pi. The Raspberry Pi OS can not be displayed on this display module, it is a slave/secondary display only. The display module is programmed using the Workshop4 IDE and the Raspberry Pi acts as the Host to send/receive information to/from the display module.
Raspberry Pi itself is not included

uLCD-32PTU-AR Arduino Display Module Pack, including uLCD-32-PTU Display, Adaptor Shield + Cable

uLCD-32PTU-AR
Arduino Display Module Pack, including uLCD-32-PTU Display, Adaptor Shield + Cable

The uLCD-32PTU-AR is an Arduino Display Module Pack, which includes a uLCD-32PTU 3.2" LCD Display with Resistive Touch, a 4D Arduino Adaptor Shield and 5 way interface cable.

The uLCD-32PTU-AR customises the uLCD-32PTU Display specifically for interfacing with the Arduino, to provide a quick and easy interface without any wiring hassles.

The Arduino Display Module Pack enables an Arduino user to quickly connect the 4D Arduino Adaptor Shield to their Arduino, connect the 5 way cable between the Adaptor and the Display Module, and be connected in seconds to start programming their new 4D Systems Display.

The uLCD-32PTU-AR has a comprehensive range of serial commands ready to be received from the Arduino, to draw primitives such as lines, rectangles, circles and text, displaying images, playing sound and logging data to uSD card.

Utilises the Arduino's UART Serial Port and a single Digital pin.


features

  • 3.2" Arduino Display Module Pack
  • Powerful Graphics
  • Low-Cost Display Solution
  • Easily Connect to your Arduino

uLCD-32PTU with integrate resistive touch


3.2" microLCD PICASO Display

  • Powerful Graphics
  • 65K True to Life Colours
  • Low-Cost Display Solution
  • Integrated Resistive Touch
  • Embedded Audio

The uLCD-32PTU is a compact and cost effective Intelligent Display Module packed with plenty of features, ready to become the GUI for your target application, and capable of being an interface controller for a number of applications.

Embedded at the heart of the design is the PICASO processor, which is driven by a highly optimised virtual core engine called EVE (Extensible Virtual Engine). An extensive range of hardware and software peripherals have been integrated into the design, to give the user freedom to adapt the module to suit almost any application.

The uLCD-32PTU is an elegant combination of a 3.2" (240x320) LCD Screen, audio amplifier and speaker, micro-SD card connector, Lithium Battery Support, along with a group of general purpose input/output pins (GPIO's), including I2C and serial COMMS.

The uLCD-32PTU display module serves as a perfect solution to be deployed at the forefront of any product design, requiring a brilliance of colour, animation or images on any application. This PICASO driven Intelligent Display Module is a perfect example of where art meets technology.

Size and weight
  • Display Viewing Area: 48.6 x 64.8 mm
  • Module Width: 54.3 mm
  • Module Height: 77.7 mm
  • Module Depth: 17.0 mm
  • Module Weight: 50.00 g

about the display module
  • Low-cost 3.2" LCD-TFT display graphics user interface solution.
  • 240 x 320 VGA resolution, RGB 65K true to life colours, TFT screen with Integrated 4-Wire Resistive Touch Panel.
  • Easy 5 pin interface to any host device:
  • VCC, TX, RX, GND, RESET
  • Powered by the 4D-Labs PICASO processor (also available as separate OEM IC)
  • 14KB of flash memory for user code storage and 14KB of SRAM for user variables, or 14KB shared user code and program variables.
  • 2 x Asynchronous hardware serial ports (COM0, COM1), TTL interface, with 300 to 600K baud.
  • 1 x I2C interface (Master).
  • 8 x 16 bit timers with 1 millisecond resolution.
  • 13 x General Purpose I/O pins. Supports fast 8-bit parallel data transfer through Upper 8 bits.
  • On-board micro-SD memory card socket for multimedia and data logging with SDHC memory card support. A SPI compatible micro-SD card is required.
  • DOS compatible file access (FAT16 format) as well as low level access to card memory.
  • Lithium Polymer battery support, with built in battery charger and automatic change-over.
  • Dedicated PWM Audio pin driven by WAV files from micro-SD card.
  • On-board audio amplifier with a tiny 8Ω speaker for sound generation and WAV file playback.
  • Built in extensive 4DGL graphics and system library functions.
  • Display full colour images, animations, icons and video clips.
  • Supports all available Windows fonts.
  • A 30 pin header for I/O expansion and future plug-in daughter boards.
  • 4.0V to 5.5V range operation (single supply).
  • Module dimensions: 56.32 x 92.19 x 15.9mm (including corner plates).
  • Weighing ~ 50g.
  • Display Viewing Area: 48.60 x 64.80mm
  • 4 x corner plates with 2.7mm holes for mechanical mounting.
  • RoHS Compliant.

Brightek Thermal Printer without case

Brightek Thermal Printer without case
Thermal Printer with TTL serial or parallel interface.
Thermal printer is not equipped with packing, so that it can be easily implemented into a custom product.

specifications:
- Power supply: 24VDC.
- Interface: TTL Serial and Parallel
- Capable of printing 384 dots per line
- Print speed is about 80mm / s
- Accommodates up to 48mm paper width

NAU-ES_MINI_USB

NAU-ES_MINI_USB


USB Dongle for NAU8224-EVB. USB Dongle serves to adjust the volume of NAU8224-EVB from the PC via the USB port

Evaluation Board for NAU8224

NAU8224-EVB is  class-D audio amplifier module which is able to output sound strereo with 3.1W power. This module is based NAU8224 as IC amplifier IC. Volume setting can be controlled directly via the PC (program supplied GUI) through the additional USB Dongle: NAU-ES_MINI_USB

specifications:
- Power supply: 5VDC
- Audio input (digital / analog): Analog
- Input video (digital / analog): Analog
- Audio output (digital / analog): Analog
- Output video (digital / analog): Analog
- Audio Amplifier: Class D (NAU8224)
- Has I2C interface to set the volume

Nuvoton ADC NAU7802 Evaluation Board

Nuvoton ADC NAU7802 Evaluation Board
EVB module for IC ADC NAU7802 from Nuvoton.

This module is equipped with a pin header and VR are used to configure the NAU7802.
specifications:
- Power supply: 2.7 VDC - 5.5 VDC
- Resolution: 24-bit
- Number of channels: 2 channels single ended, 2-channel differential input
- Interface: I2C

USB WiFi Module compatible with ODROID-X2/U/U2 (WiFi module 2)


USB WiFi Module compatible with ODROID-X2/U/U2


The Realtek RTL8191SU is a highly integrated single-chip MIMO (Multiple In, Multiple Out) Wireless LAN (WLAN) USB 2.0 network interface controller complying with the IEEE 802.11n specification. It combines a MAC, 1T2R capable baseband and RF in a single chip, the RTL8191SU provides a complete solution for a high-performance wireless client.

Monday, October 28, 2013

uVGA-III (microVGA-III)

THE uVGA-III
  • Standalone Graphics Engine
  • VGA Interface
  • QVGA/VGA/WVGA Compatible
  • VGA Graphics Engine - PICASO

The uVGA-III module is a compact and cost effective standalone VGA graphics engine powered by the PICASO graphics controller. It can provide QVGA/VGA/WVGA graphics solution to any embedded project with its powerful graphics, text, image, animation and countless more features built inside the module.

The PICASO works as a standalone device. It allows the user to take complete control of all available resources on the uVGA-III hardware platform such as the Serial Ports, uSD memory card, I/O pins, etc. This eliminates the need for an external host controller/processor to drive the uVGA-III module via serial commands. It provides the user complete control over the hardware module allowing them to quickly develop practical applications.

Programmed with 4D Systems Workshop 4 IDE Software, the uVGA-III could be the ideal embedded VGA graphics solution for your project.

Size and weight
  • Module Width: 39.0 mm
  • Module Height: 57.2 mm
  • Module Depth: 11.0 mm
  • Module Weight: 17.00g

Specs:
  • Simple VGA interface to variety of monitors and LCD screens.
  • Supports the following resolutions,
  • 320 x 240 (QVGA)
  • 640 x 480 (VGA)
  • 800 x 480 (WVGA)
  • Supports RGB 65K true to life colours.
  • Easy 5 pin interface to any Serial device: VCC, TX, RX, GND, RESET.
  • Powered by the 4D-Labs PICASO processor (also available as separate OEM IC for volume users).
  • 15K bytes of flash memory for user code storage and 14K bytes of SRAM for user variables.
  • 2 x Asynchronous hardware serial ports (COM0, COM1), TTL interface, with 300 baud to 600K baud.
  • 1 x I2C interface (Master).
  • 13 x General Purpose I/O pins. Upper 8 bits can be used as an I/O Bus for fast 8-bit parallel data transfers.
  • On-board micro-SD memory card socket for multimedia and data logging with SDHC memory card support. A SPI compatible micro-SD card is required
  • 8 x 16 bit timers with 1 millisecond resolution.
  • DOS compatible file access (FAT16 format) as well as low level access to card memory.
  • Dedicated PWM Audio pin supports FAT16 audio WAV files and complex sound generation.
  • Built in extensive 4DGL graphics and system library functions. For all available features and functions under the 4DGL programming language.
  • Display full colour images, animations, icons and video clips.
  • Supports all available Windows fonts and characters.
  • 15 pin D-type standard VGA connector to interface to any external VGA monitor (via detachable cable, included).
  • A 30 pin header for I/O expansion and future plug-in daughter boards.
  • 4.0V to 5.5V range operation (single supply).
  • Module dimensions: 57.2 x 39mm.
  • Weighing ~ 17g.
  • RoHS Compliant.
The uVGA-III includes the following:

  • uVGA-III
  • 150mm 5 way Female-Female jumper cable, for quick connection to another device or breadboard
  • 5 way Male-Male adaptor (for converting the Female-Female cable to be Male-Female)
  • VGA Cable
  • 2x15 SMT Male Connector
  • Quick Start User Guide

Note:
The Display Modules PICASO processor can be re-programmed with the latest PmmC/Firmware as updates or bug fixes are mad available. This process is conducted via the Workshop 4 IDE Software, and requires a 4D Systems approved programming cable or adaptor.

Sound Level Meter Lutron SL-4012

Sound Level Meter Lutron SL-4012

Features:
* Large LCD display, easy to read.
* Characteristics of frequency network designed according to IEC 61 672 standard type 2.
* Measurement range: auto and manual.
* Network A & C are in compliance with the standards.
* Dynamic characteristics mode Fast & Slow.
* AC output for system expansion.
* RS-232 interface.
* Features of VR that can be set for easy calibration.
* Hold function and record memory (max., min.).
* Condenser microphone for high accuracy and long term stability.
* Function Max. Hold to store the maximum value on the display screen.
* Warning indicator for over and under load.
* Display LCD display-efficient and clear even under bright lighting conditions.
* Using the components of a strong, durable, including ABS plastic casing.

Friday, October 25, 2013

STR-E912 DEVELOPMENT BOARD FOR STR912 ARM966 MICROCONTROLLER WITH CAN, USB, RS232, ETHERNET TFT LCD DISPLAY

STR-E912 DEVELOPMENT BOARD FOR STR912 ARM966 MICROCONTROLLER WITH CAN, USB, RS232, ETHERNET TFT LCD DISPLAY


FEATURES
  • MCU: STR912FW44X ARM966E-S 96Mhz, 512K+32K internal Flash, 96K internal RAM, external bus, 9 DMA channels, 10bit ADC, 10/100Mbit Ethernet MAC, 3x UARTS, USB 2.0, CAN,
  • 128x128 pixel 12 bit color TFT LCD with backlight
  • Joystick with four directions and push action, analogue trimmer potentiometer connected to ADC input
  • ETHERNET 100 PHY KSZ8721BL
  • RS232 drivers and connectors
  • USB connectors
  • CAN driver and connector
  • SD/MMC card (on bottom of the board)
  • IrDA transciever on board (optional)
  • Audio Output
  • Audio Input
  • Speaker on board with volume control
  • UEXT connector with I2C, SPI, RS232 and power supply for connecting add-on modules like RF link, MP3, etc available from Olimex
  • JTAG interface (optional JTAG-TRACE connector)
  • ADC extension port
  • Extension ports for all unused microcontroller ports
  • External memory bus connector
  • Li-ion CR2032 battery connector for the RTC
  • Dimensions: 145x130 mm (5.7 x 5.1")

STM32-P407 DEVELOPMENT BOARD FOR STM32F407ZGT6 CORTEX-M4 MICROCONTROLLER

STM32-P407 DEVELOPMENT BOARD FOR STM32F407ZGT6 CORTEX-M4 MICROCONTROLLER

STM-P407 is a low-cost entry board for developing custom applications with STM32F407ZGT6 Cortex M4 microcontrollers from ST. This board has plenty of RAM, an LCD display and an onboard camera which allows image processing. The Ethernet has a 100MB interface which allows the development of web applications.


FEATURES
  • STM32F407ZGT6 Cortex-M4 210DMIPS, 1MB Flash, 196KB RAM, 3×12-bit 2.4 MSPS A/D, 2×12-bit D/A converters, USB OTG HS and USB OTG HS, Ethernet, 14 timers, 3 SPI, 3 I2C, Ethernet, 2 CANs, 3 12 bit ADCs, 2 12 bit DACs, 114 GPIOs, Camera interface
  • JTAG connector with ARM 2x10 pin layout for programming/debugging
  • 512 KB fast external SRAM on board
  • 4 Status LEDs
  • Stereo Audio Codec CS4344
  • CAN driver
  • Temperature sensor
  • Trimmer potentiometer
  • Joystick for navigation
  • 6610 LCD color 128x128 pixel TFT display
  • SAMSUNG E700 VGA camera 640x480 color
  • Tamper and Wakeup buttons
  • 2 RS232 drivers and connectors
  • 25 Mhz quartz crystal
  • USB_OTG
  • USB_HOST
  • 100Mbit Ethernet
  • Mini SD/MMC card connector
  • UEXT connector
  • Power Jack
  • RESET button and circuit
  • Power-on led
  • 3V battery connector
  • Extension port connectors for many of microcontrollers pins
  • PCB: FR-4, 1.5 mm (0,062"), soldermask, silkscreen component print
  • Dimensions: 160x116 mm (6.3x4.6")

STM32-P207 PROTOTYPE BOARD FOR STM32F207 CORTEX-M3 MICROCONTROLLER

STM32-P207 PROTOTYPE BOARD FOR STM32F207 CORTEX-M3 MICROCONTROLLER

STM-P207 is a low-cost entry board for developing custom applications with STM32F207ZET6 Cortex M3 microcontrollers from ST. This board has plenty of RAM, an LCD display and an onboard camera which allows image processing. The Ethernet has a 100MB interface which allows the development of web applications.

FEATURES
  • CPU: STM32F207ZET6 120Mhz 32 bit ARM-based microcontroller with 512 KB Flash, 128 (112+16) KB RAM, USB OTG HS and USB OTG HS, Ethernet, 14 timers, 3 SPI, 3 I2C, Ethernet, 2 CANs, 3 12 bit ADCs, 2 12 bit DACs, 114 GPIOs, Camera interface
  • JTAG connector with ARM 2x10 pin layout for programming/debugging
  • 512 KB fast external SRAM on board
  • 4 Status LEDs
  • Stereo Audio Codec CS4344
  • CAN driver
  • Temperature sensor
  • Trimmer potentiometer
  • Joystick for navigation
  • 6610 LCD color 128x128 pixel TFT display
  • SAMSUNG E700 VGA camera 640x480 color
  • Tamper and Wakeup buttons
  • 2 RS232 drivers and connectors
  • 25 Mhz quartz crystal
  • USB_OTG
  • USB_HOST
  • 100Mbit Ethernet

STM32-P152 PROTOTYPE BOARD FOR STM32L152VBT6 LOW POWER CORTEX-M3 MICROCONTROLLER

STM32-P152 PROTOTYPE BOARD FOR STM32L152VBT6 LOW POWER CORTEX-M3 MICROCONTROLLER

This is a low-cost development board for the new STM32L series of ultra low-power microcontrollers of ST Microelectronics. STM32-H152 covers STM32L152VBT6. This board was specifically designed for low-power handheld operations, with Li-ion battery charges on board and USB. It's perfect to make data loggers. The 32khz crystal allows RTC implementation.


FEATURES
  • MCU: STM32L152VBT6 ARM 32 bit CORTEX M3™ with 128K Bytes Program Flash, 16K Bytes RAM, USB, LCD, I2C, SPI, USART, 32 Mhz clock, 80 GPIO, 1.8-3.6V power supply
  • Standard JTAG connector with ARM 2x10 pin layout for programming/debugging with ARM-JTAG
  • Li-ion battery charger
  • USB connector
  • RS232 connector and driver
  • Olimex LCD
  • UEXT connector
  • Two user buttons
  • Analog potentiometer
  • RESET button and circuit
  • Two status LED
  • Power supply LED
  • On board voltage regulator 3.3V with up to 800mA current 
  • single power supply: takes power from USB port or extension connector pin
  • 8 Mhz crystal oscillator
  • 32768 Hz crystal and RTC backup battery connector
  • Extension headers for all uC ports
  • PCB: FR-4, 1.5 mm (0,062"), soldermask, silkscreen component print
  • Dimensions: 70x 50mm (2.75 x 2.0")
  • Distance between the exntension connectors: 38.1 mm (1.5")

STM32-P107 PROTOTYPE BOARD FOR STM32F107 CORTEX-M3 MICROCONTROLLER

STM32-P107 PROTOTYPE BOARD FOR STM32F107 CORTEX-M3 MICROCONTROLLER

STM-P107 is a low-cost entry board for developing with STM32F107VCT6 Cortex M3 microcontrollers from ST. This board is the perfect solution for USB peripherals development. All microcontroller ports are available on extension connectors.


FEATURES
  • CPU: STM32F107VCT6 32 bit ARM-based microcontroller with 256 KB Flash, 64 KB RAM, USB OTG, Ethernet, 10 timers, 2 CANs, 2 ADCs, 14 communication interfaces
  • JTAG connector with ARM 2x10 pin layout for programming/debugging
  • 25 Mhz quartz crystal
  • USB_OTG
  • USB_HOST
  • 100Mbit Ethernet
  • RS232
  • Mini SD/MMC card connector
  • UEXT connector
  • Power Jack
  • Two user buttons
  • RESET button and circuit
  • Two status leds
  • Power-on led
  • 3V battery connector
  • Extension port connectors for many of microcontrollers pins
  • PCB: FR-4, 1.5 mm (0,062"), soldermask, silkscreen component print
  • Dimensions: 132.08x96.52mm (5.2x3.8")

STM32-P103 Prototype board FOR STM32F103RBT6 CORTEX M3 ARM MICROCONTROLLER

STM32-P103 Prototype board FOR STM32F103RBT6 CORTEX M3 ARM MICROCONTROLLER

The ARM Cortex-M3 processor is the latest generation of ARM processors for embedded systems. It has been developed to provide a low-cost platform that meets the needs of MCU implementation, with a reduced pin count and low-power consumption, while delivering an outstanding computational performance and an advanced system response to interrupts. The ARM Cortex-M3 32-bit RISC processor features exceptional code-efficiency, delivering the high-performance expected from an ARM core in the memory size usually associated with 8- and 16-bit devices.

The STM32F103 performance line family has an embedded ARM core and is therefore compatible with all ARM tools and software. It combines the high performance ARM Cortex-M3 CPU with an extensive range of peripheral functions and enhanced I/O capabilities. STM32-P103 is a good start-up board for learning the new ST Cortex-M3 based microcontrollers STM32F103RBT6. It has RS232 and both USB and CAN. It also features a prototype area with all microcontroller signals near it, giving the customer an easy way to implement his own schematics and add-ons.


FEATURES
  • MCU: STM32F103RBT6 ARM 32 bit CORTEX M3™ with 128K Bytes Program Flash, 20K Bytes RAM, USB, CAN, x2 I2C, x2 ADC 12 bit, x3 UART, x2 SPI, x3 TIMERS, up to 72Mhz operation
  • Standard JTAG connector with ARM 2x10 pin layout for programming/debugging with ARM-JTAG
  • USB connector
  • CAN driver and connector
  • RS232 driver and connector
  • UEXT connector which allows different modules to be connected (as MOD-MP3, MOD-NRF24LR, etc)
  • SD-MMC connector
  • Backup battery connector
  • RESET button
  • Status LED
  • Power supply LED
  • On-board voltage regulator 3.3V with up to 800mA current
  • Single power supply: takes power from USB port or power supply jack
  • 8 Mhz crystal oscillator
  • 32768 Hz crystal and RTC backup battery connector
  • Extension headers for all uC ports
  • PCB: FR-4, 1.5 mm (0,062"), red soldermask, silkscreen component print
  • Dimensions: 100 x 90mm (3.94 x 3.5")

STM32-LCD DEVELOPMENT BOARD FOR STM32F103ZE AND 3.2" COLOR LCD WITH TOUCHSCREEN

STM32-LCD DEVELOPMENT BOARD FOR STM32F103ZE AND 3.2" COLOR LCD WITH TOUCHSCREEN

STM32-LCD was designed primarily to be used as a matchup stackable board to the MOD-GSM GSM connectivity module. Together, the two boards create a unique platform for GSM-enabled applications and M2M interface to different areas.


FEATURES
  • MCU– STM32F103ZE - high-performance ARM® Cortex™-M3 32-bit RISC core operating at a 72 MHz frequency, high-speed embedded memories (Flash memory - 512 Kbytes and SRAM - 64 Kbytes), and an extensive range of enhanced I/Os and peripherals connected to two APB buses.
  • JTAG connector
  • UEXT40 connector
  • 2 x UEXT connectors: Universal Olimex Extension Connector which connects to our MOD-XXX external modules
  • EXT_PWR connector to power up the GSM module
  • Mini SD/MMC
  • Mini USB
  • LCD TFT 320x240 pixels 12-bit colour with touch screen (ILI9325) or (ILI9320)
  • Power source connector
  • Accelerometer
  • 8 MHz crystal oscillator
  • Reset circuit
  • Clock circuit
  • PCB: FR-4, 1.5 mm (0,062"), soldermask, silkscreen component print
  • Dimensions 79.2x57.6 mm (3.12x2.27”)

Thursday, October 24, 2013

STM32-H407 DEVELOPMENT BOARD FOR STM32F407ZGT6 CORTEX-M4 MICROCONTROLLER

STM32-H407 DEVELOPMENT BOARD FOR STM32F407ZGT6 CORTEX-M4 MICROCONTROLLER

STM-H407 is a low-cost entry board for developing custom applications with STM32F407ZGT6 Cortex M4 microcontrollers from ST. This board has plenty of resources and all GPIO ports are available on extension connectors, an ARDUINO compatible platform connector is also available.


FEATURES
  • STM32F407ZGT6 Cortex-M4 210DMIPS, 1MB Flash, 196KB RAM, 3×12-bit 2.4 MSPS A/D, 2×12-bit D/A converters, USB OTG HS and USB OTG HS, Ethernet, 14 timers, 3 SPI, 3 I2C, Ethernet, 2 CANs, 3 12 bit ADCs, 2 12 bit DACs, 114 GPIOs, Camera interface
  • JTAG connector with ARM 2x10 pin layout for programming/debugging
  • UEXT connector
  • USB host
  • USB-OTG
  • SD-card
  • Input DCDC power supply which allows operation from 6-16VDC source
  • Power and User LEDs
  • Reset and User buttons
  • 4 full 20-pin Ports with the external memory bus for add-on modules
  • Arduino platform with unsoldered headers
  • 4 rubber pads for the mount holes
  • PCB: FR-4, 1.5 mm (0,062"), soldermask, silkscreen component print
  • Dimensions: 90x76 mm (3.54x3")

STM32-H152 HEADER BOARD FOR STM32L152VBT6 LOW POWER CORTEX-M3 MICROCONTROLLER

STM32-H152 HEADER BOARD FOR STM32L152VBT6 LOW POWER CORTEX-M3 MICROCONTROLLER

This is a low-cost development board for the new STM32L series of ultra low-power microcontrollers of ST Microelectronics. STM32-H152 covers STM32L152VBT6. This board was carefully designed to low-power handheld operation, with Li-ion battery charges on board and USB. It's perfect to make data loggers. The 32khz crystal allows RTC implementation.

FEATURES
  • MCU: STM32L152VBT6 ARM 32bit CORTEX M3™ with 128K Bytes Program Flash, 16K Bytes RAM, USB, LCD, I2C, SPI, USART, 32 Mhz clock, 80 GPIO, 1.8-3.6V power supply
  • Standard JTAG connector with ARM 2x10 pin layout for programming/debugging with ARM-JTAG
  • Li-ion battery charger
  • USB connector
  • UEXT connector
  • Wake-up user button
  • RESET button and circuit
  • Two status LED
  • Power supply LED
  • On board voltage regulator 3.3V with up to 800mA current
  • Single power supply: takes power from USB port or extension connector pin
  • 8 Mhz crystal oscillator
  • 32768Hz crystal and RTC backup battery connector
  • Extension headers for all uC ports
  • PCB: FR-4, 1.5 mm (0,062"), red soldermask, silkscreen component print
  • Dimensions: 70x 50mm (2.75 x 2.0")
  • Distance between the exntension connectors: 38.1 mm (1.5")

STM32-H107 HEADER BOARD FOR STM32F107 CORTEX-M3 MICROCONTROLLER

STM32-H107 HEADER BOARD FOR STM32F107 CORTEX-M3 MICROCONTROLLER

The ARM Cortex-M3 processor is the latest generation of ARM processors for embedded systems. It has been developed to provide a low-cost platform that meets the needs of MCU implementation, with a reduced pin count and low-power consumption, while delivering an outstanding computational performance and an advanced system response to interrupts. The ARM Cortex-M3 32-bit RISC processor features exceptional code-efficiency, delivering the high performance expected from an ARM core in a memory size usually associated with 8-and 16-bit devices.

The STM32F107 Performance Line family has an embedded ARM core and is therefore compatible with all ARM tools and software. It combines the high performance ARM Cortex-M3 CPU with an extensive range of peripheral functions and enhanced I/O capabilities. STM32-H107 is low cost development board for the new ST Cortex-M3 based microcontrollers STM32F107VCT6. This board is perfect solution for USB peripherials development. All microcontroller ports are available on extension connectors.



FEATURES

  • CPU: STM32F107VCT6 32 bit ARM-based microcontroller with 256 KB Flash, 64KB RAM, USB OTG, Ethernet, 10 timers, 2 CANs, 2 ADCs, 14 communication interfaces
  • JTAG connector with ARM 2x10 pin layout for programming/debugging
  • 25 Mhz quartz crystal
  • USB_OTG
  • Power Jack
  • WKUP button
  • RESET button
  • Two status leds
  • Power-on led
  • 3V battery connector
  • Extension port connectors for many of microcontrollers pins
  • PCB: FR-4, 1.5 mm (0,062"), soldermask, silkscreen component print
  • Dimensions: 70x50mm (2.76x1.97")

STM32-H103 HEADER BOARD FOR STM32F103RBT6 CORTEX-M3 MICROCONTROLLER

STM32-H103 HEADER BOARD FOR STM32F103RBT6 CORTEX-M3 MICROCONTROLLER

The ARM Cortex-M3 processor is the latest generation of ARM processors for embedded systems. It has been developed to provide a low-cost platform that meets the needs of MCU implementation, with a reduced pin count and low power consumption, while delivering an outstanding computational performance and an advanced system response to interrupts. The ARM Cortex-M3 32-bit RISC processor features exceptional code-efficiency, delivering the high-performance expected from an ARM core in a memory size usually associated with 8- and 16-bit devices.

The STM32F103 Performance Line family has an embedded ARM core and is therefore compatible with all ARM tools and software. It combines the high performance ARM Cortex-M3 CPU with an extensive range of peripheral functions and enhanced I/O capabilities. STM32-H103 is a low-cost development board for the new ST Cortex-M3 based microcontrollers STM32F103RBT6. This board is the perfect solution for USB peripherals development. All microcontroller ports are available on extension connectors.



FEATURES

  • MCU: STM32F103RBT6 ARM 32 bit CORTEX M3™ with 128K Bytes Program Flash, 20K Bytes RAM, USB, CAN, x2 I2C, x2 ADC 12 bit, x3 UART, x2 SPI, x3 TIMERS, up to 72Mhz operation
  • Standard JTAG connector with ARM 2x10 pin layout for programming/debugging with ARM-JTAG
  • USB connector
  • User button
  • RESET button
  • Status LED
  • Power supply LED
  • On board voltage regulator 3.3V with up to 800mA current 
  • single power supply: takes power from USB port or extension connector pin
  • 8 Mhz crystal oscillator
  • 32768 Hz crystal and RTC backup battery connector
  • Extension headers for all uC ports
  • PCB: FR-4, 1.5 mm (0,062"), soldermask, silkscreen component print
  • Dimensions: 61x 34mm (2.4 x 1.3")
  • Distance between the exntension connectors: 25.4 mm (1")

STM32-E407 DEVELOPMENT BOARD FOR STM32F407ZGT6 CORTEX-M4 MICROCONTROLLER WITH ETHERNET, USB HOST, USB-OTG

STM32-E407 DEVELOPMENT BOARD FOR STM32F407ZGT6 CORTEX-M4 MICROCONTROLLER WITH ETHERNET, USB HOST, USB-OTG

STM-E407 is a low-cost entry board for developing custom applications with STM32F407ZGT6 Cortex M4 microcontrollers from ST. This board has plenty of resources and all GPIO ports are available on extension connectors, an ARDUINO compatible platform connector is also available.


FEATURES
  • STM32F407ZGT6 Cortex-M4 210DMIPS, 1MB Flash, 196KB RAM, 3 x 12-bit 2.4 MSPS A/D, 2 x 12-bit D/A converters, USB OTG FS and USB OTG HS, Ethernet, 14 timers, 3 x SPI, 3 x I2C, Ethernet, 2 CANs, 3 x 12 bit ADCs, 2 x 12 bit DACs, 114 GPIOs, Camera interface
  • JTAG connector with ARM 2x10 pin layout for programming/debugging
  • Ethernet 100Mbit
  • UEXT connector
  • USB host
  • USB OTG
  • SD-card
  • Input DCDC power supply which allows operation from 6-16VDC source
  • Power and User LEDs
  • Reset and User buttons
  • 4 full 20-pin Ports with the external memory bus for add-on modules
  • Arduino platform with unsoldered headers
  • 4 rubber pads for the mount holes
  • PCB: FR-4, 1.5 mm (0.062"), soldermask, silkscreen component print
  • Dimensions: 101.6 x 86mm (4 x 3.4")

STM32-103STK STARTERKIT BOARD FOR STM32F103RBT6 CORTEX-M3 MICROCONTROLLER

STM32-103STK STARTERKIT BOARD FOR STM32F103RBT6 CORTEX-M3 MICROCONTROLLER

The ARM Cortex-M3 processor is the latest generation of ARM processors for embedded systems. It has been developed to provide a low-cost platform that meets the needs of MCU implementation, with a reduced pin count and low-power consumption, while delivering outstanding computational performance and an advanced system response to interrupts. The ARM Cortex-M3 32-bit RISC processor features exceptional code-efficiency, delivering the high-performance expected from an ARM core in the memory size usually associated with 8- and 16-bit devices.

The STM32F103 Performance Line family has an embedded ARM core and is therefore compatible with all ARM tools and software. It combines the high performance ARM Cortex-M3 CPU with an extensive range of peripheral functions and enhanced I/O capabilities.

STM32-103STK is a starter-kit board which allows you to explore all of STM32F103's capabilities. It has a NOKIA 3310 BW 84x48 LCD, buttons, a SD-MMC card, an Accelerometer, a 2.4Ghz RF transceiver, Audio Input and Output, and the power supply is made from single 1.5V AA cell battery.


FEATURES
  • MCU: STM32F103RBT6 ARM 32 bit CORTEX M3™ with 128K Bytes Program Flash, 20K Bytes RAM, USB, CAN, x2 I2C, x2 ADC 12 bit, x3 UART, x2 SPI, x3 TIMERS, up to 72Mhz operation
  • Standard JTAG connector with ARM 2x10 pin layout for programming/debugging with ARM-JTAG
  • USB mini connector
  • LCD NOKIA 3310 BW 84x48 pixels
  • 1.5V battery connector with step-up converter
  • 3-axis accelerometer
  • SD-MMC card
  • 2.4 Ghz transciever with Nordic nRF23L01
  • Audio input
  • Audio output
  • User buttions x2
  • Joystick with 4 directions and push action
  • UEXT connector for other Olimex's modules connection like MOD-MP3, etc.
  • RESET button
  • Status LED
  • 8 Mhz crystal oscillator
  • 32768 Hz crystal and RTC backup battery connector
  • Extension headers for all uC ports
  • PCB: FR-4, 1.5 mm (0,062"), soldermask, silkscreen component print
  • Dimensions: 90 x 65mm (3.5 x 2.5")

Saturday, October 19, 2013

AnalogDevices ADuC-P7026 DEVELOPMENT PROTOTYPE BOARD FOR ADUC7026 ARM7 MICROCONTROLLER


AnalogDevices ADuC-P7026 DEVELOPMENT PROTOTYPE BOARD FOR ADUC7026 ARM7 MICROCONTROLLER
ADuC-P7026 is a low-cost development board for Analog Devices ADuC7026 ARM7 microcontroller. Among the unique features for this microcontroller are the 1Msps ADCs and DACs, 3 phases PWM module which are not available from other ARM vendors. ADuC7026 have build in bootloader which could be used to load code in the microcontroller without need for external programmer.


FEATURES
  • MCU: ADuC7026 16/32 bit ARM7TDMI-S™ with 64K Bytes Program Flash, 8K Bytes RAM, 12 channel 12 bit ADC with 1Msps, 4 channels 12 bit DACs, on chip Vref, on-chip temperature sensor, UARTs, 2x I2C, SPI, Three phase PWM, PLA programmable logic, external memory interface, 2x 32bit TIMERS, WDT, 5V tolerant I/O, up to 45MHz operation
  • ARM JTAG 2x10 pin connector
  • RESET circuit
  • USB-RS232 converter
  • Two status LED
  • Two buttons
  • Two trimmer potentiometers connected to ADC inputs
  • Bi-color LED connected to two DACs
  • SD and RESET buttons for easy bootloader enable
  • Power supply LED
  • On board voltage regulator 3.3V with up to 800mA current
  • Power supply filtering capacitor
  • Powered from USB port no need for external power supply adapter
  • Connector for external power supply if USB is not present
  • 32768 Hz crystal
  • Extension headers for all microcontroller ports
  • Prototype area with split analogue and digital area
  • PCB: FR-4, 1.5 mm (0,062"), green soldermask, white silkscreen component print
  • Dimensions: 100x80 mm (3.9x3.15")

AnalogDevices ADuC-H7020 HEADER BOARD IN DIL40 FORMAT FOR ADUC7020 ARM7 MICROCONTROLLER

AnalogDevices ADuC-H7020 HEADER BOARD IN DIL40 FORMAT FOR ADUC7020 ARM7 MICROCONTROLLER

ADuC-H7020 provides a low-cost way to develop with the ADuC7020 microcontroller without the need of fancy soldering skils. This board is designed to fit in a normal DIL40 socket, so you can make your prototypes easy and troubles free. ADuC7020 is unique with the 1Msps ADCs and DACs and with the 3 phase PWM.


FEATURES
  • MCU: ADuC7020 - ARM7TDMI Core, 16/32-bit RISC architecture, 5 Channels 12-bit, 1MSPS ADC, Differential and single-ended modes, 0 to Vref Analog Input Range, 4 Outputs 12-bit Voltage Output DACs, On-Chip 20ppm/°C Voltage Reference, On-Chip Temperature Sensor (±3°C), Uncommitted Voltage Comparator, JTAG Port, Clocking options: Trimmed On-Chip Oscillator (± 2%), External Watch crystal, External clock source
  • 45MHz PLL with Programmable Divider, 62k Bytes Flash/EE Memory, 8k Bytes SRAM, In-Circuit Download, JTAG based Debug, Software triggered in-circuit re-programmability, UART, dual I2C and SPI Serial I/O, 14-Pin GPIO Port, 2 X General Purpose Timers, Wake-up and Watchdog Timers, Power Supply Monitor, PLA – Programmable Logic (Array), Power Specified for 3V operation, Active Mode: 6mW (@1MHz) 300mW (@45MHz), Fully specified for –40°C to 85°C operation;
  • DIL-40 (0.6" wide) layout for easy mount on prototype/mother boards
  • RESET button
  • SERIAL DOWNLOAD (bootloader enable) button
  • Green LED status
  • Red power supply LED
  • 32 768 Hz oscillator crystal
  • Power supply filtering capacitors and ferite bead
  • PCB: FR-4, 1.5 mm (0,062"), green soldermask, white silkscreen component print

OKI-E5003 DEVELOPMENT BOARD FOR OKIML67Q5003 ARM7 MICROCONTROLLER WITH USB, RS232, ETHERNET AND COMPACT FLASH CONNECTOR

OKI-E5003 DEVELOPMENT BOARD FOR OKIML67Q5003 ARM7 MICROCONTROLLER WITH USB, RS232, ETHERNET AND COMPACT FLASH CONNECTOR

FEATURES
  • Heareds to accept OKI-H5003 processor module
  • SD/MMC card connector
  • Compact Flash (CF) connector
  • LCD 16x2 with backlight
  • Two Relays
  • Two optoisolated digital inputs
  • Status LED
  • Header to accept CS-8900A Ethernet module
  • Four buttons
  • Analog trimpot connected to ADC
  • Thermistor
  • RS232 connector and driver
  • Extension connector
  • PCB: FR-4, 1.5 mm (0,062"), soldermask, silkscreen component print
  • Dimensions: 160x115 mm (6.3 x 4.5 ")

OKI-H5003 HEADER BOARD FOR OKI ML67Q5003 MICROCONTROLLER

OKI-H5003 HEADER BOARD FOR OKI ML67Q5003 MICROCONTROLLER 





FEATURES
  • MCU: ML67Q5003 ARM7TDMI 16/32-bit RISC CPU, 512KB internal Flash, 32KB internal SRAM, 8KB cache memory, Built-in external memory controller supports external SRAM, SDRAM, EDO DRAM, Flash, 28 interrupt sources, DMA: 2 channels with external access, Timers: 7 16-bit timers, Watch-Dog Timer: dual stage 16 bit, PWM: Two 16-bit channels, Serial Interfaces: SIO, UART, USART, I2C, GPIO: 42 bits, A/D Converter: Four 10-bit channels, Built-in boot ROM accommodates in-circuit Flash ROM re-programming and field-updates
  • SDRAM 16MB (8MB x 16bit) 7.5 ns / 166Mhz (allows to run uclinux)
  • Flash 8MB (4MB x16 bit) 80 ns (enough to store uclinux boot image)
  • SRAM 512KB (256KB x16 bit) 10 ns
  • 7.5 Mhz crystal oscillator (PLL=4 60Mhz)
  • JTAG connector
  • USB-RS232 convertor
  • Status LED
  • RESET supervisor IC and button
  • EXTENSION IDC34 connectors for all uC ports
  • USB-RS232 converter connected to UART0
  • Power supply can be from USB port or external
  • Power supply LED
  • 8 position slide switch for uC configuration
  • PCB: FR-4, 1.5 mm (0,062"), green soldermask, white silkscreen component print
  • Dimensions 100x65 mm (3.9 x 2.5 ")

TMS470-P256 dev kit by Texas Instrument

TMS470-P256 DEVELOPMENT PROTOTYPE BOARD

FEATURES
  • TMS470A256 16/32-Bit ARM7TDMI microcontroller 256KB Flash, 12KB SRAM, CAN, 2x SPI, 2x UART, C2SIb, HET, 10bit MibADC 1.55uS, WDT, up to 48 MHz operation
  • standard JTAG connector with ARM 2x10 pin layout for programming/debugging with ARM-JTAG
  • CAN connector and driver
  • RS232 interface and drivers
  • SD/MMC card connector
  • LCD 16x2 with backlight
  • Three buttons
  • Trimpot connected to ADC
  • Thermistor connected to ADC
  • Buzzer
  • UEXT - 10 pin extension connector for Olimex addon peripherials like MP3, RF2.4Ghz, RFID etc. modules
  • On board voltage regulator and reset monitor
  • Single power supply: 6V AC or DC required
  • Power supply LED
  • Power supply filtering capacitor
  • RESET button
  • 12 Mhz crystal on socket
  • ANALOG extension port connecotr
  • DIGITAL extension port connector for all uC ports
  • PCB: FR-4, 1.5 mm (0,062"), soldermask, silkscreen component print
  • Dimensions: 145 x 99 mm (5.7 x 3.9 ")

CirrusLogic CS-E9302 DEVELOPMENT BOARD FOR EP9301/EP9302 ARM920T MICROCONTROLLER WITH USB, RS232, ETHERNET AND COMPACT FLASH CONNECTOR

CirrusLogic CS-E9302 DEVELOPMENT BOARD FOR EP9301/EP9302 ARM920T MICROCONTROLLER WITH USB, RS232, ETHERNET AND COMPACT FLASH CONNECTOR


FEATURES
  • MCU: EP9302 ARM920T 200Mhz, 16+16KB instruction and data cache, MMU, SDRAM, SRAM, FLASH external bus controller 100Mhz bus, 100Mbit Ethernet MAC, two UARTS, two USB 2.0 ports, IrDA, ADC, SPI, I2S Audio, AC97, DMA 12 ch, RTC, dual PLL, WDT, 2- 16 bit, 1- 32 bit TIMERS, boot ROM, interrupt controller,
  • External SDRAM 32MB (16MB x16bit) 7.5 ns /133Mhz
  • External Flash 16MB (8MB x16 bit) 80 ns
  • ETHERNET 10/100 PHY KS8721BL
  • 2 x RS232 drivers and connectors
  • 2 x USB host connectors
  • SD/MMC card
  • IrDA transciever on board
  • UEXT connector with I2C, SPI, RS232 and power supply for connecting add-on modules like RF link, MP3, etc available from Olimex
  • JTAG interface
  • ADC extension port
  • Power supply plug in jack
  • Linux 2.4, Linux 2.6 and NetBSD sources and pre-build images ready to load with Redboot are available on the supplement CD
  • dimensions: 110x90 mm (4.3 x 3.5")

Friday, October 18, 2013

SAM9-L9261 DEVELOPMENT BOARD FOR AT91SAM9261 MICROCONTROLLER

SAM9-L9261 DEVELOPMENT BOARD FOR AT91SAM9261 MICROCONTROLLER


SAM9-L9261 is a development platform with ARM9 microcontroller, TFT LCD 3.5" 320x240 pixels with TOUCHSCREEN, 64MB SDRAM and 512MB NAND Flash. The board has an Ethernet 100Mbit controller, a USB host, a USB device, RS232 and a 40 pin extension port with all unused SAM9261 ports available for add-on boards. SAM9-L9261 have waste amount of Flash and RAM and runs Linux, WindowsCE and other RTOS natively. RTC clock is backup with 3V Li battery.

FEATURES
  • MCU: AT91SAM9261 16/32 bit ARM9™ 180MHz operation
  • Standard JTAG connector with ARM 2x10 pin layout for programming/debugging with ARM-JTAG
  • TFT LCD 3.5" 320x240 pixels with TOUCH SCREEN supported by Windows CE 6.0
  • 64 MB SDRAM
  • 512MB NAND Flash (seen in Linux as silicon drive)
  • Ethernet 100Mbit connector
  • USB host and USB device connectors
  • RS232 interface and drivers
  • SD/MMC card connector
  • One user button and one reset button
  • One power and two status LEDs
  • On board voltage regulator 3.3V with up to 800mA current
  • Single power supply: 5V DC required
  • Power supply filtering capacitor
  • 18.432 Mhz crystal
  • Extension header
  • PCB: FR-4, 1.5 mm (0,062"), soldermask, silkscreen component print
  • Dimensions: 100 x 80 mm (3.94 x 3.15")

SAM9-L9260 DEVELOPMENT BOARD FOR AT91SAM9260 MICROCONTROLLER

SAM9-L9260 DEVELOPMENT BOARD FOR AT91SAM9260 MICROCONTROLLER

SAM9-L9260 is low cost development platform with ARM9 microcontroller, 64MB SDRAM and 512MB NAND Flash. The board have Ethernet 100Mbit controller, USB host, USB device, RS232 and 40 pin extension port with all unused SAM9260 ports available for add-on boards. SAM9-L9260 have waste amount of Flash and RAM and runs Linux, WindowsCE and other RTOS natively. RTC clock is backup with 3V Li battery.


FEATURES
  • MCU: AT91SAM9260 16/32 bit ARM9™ 180MHz operation
  • Standard JTAG connector with ARM 2x10 pin layout for programming/debugging with ARM-JTAG
  • 64 MB SDRAM
  • 512MB NAND Flash (seen in Linux as silicon drive)
  • Ethernet 100Mbit connector
  • USB host and USB device connectors
  • UEXT connector
  • RS232 interface and drivers
  • SD/MMC card connector
  • One user button and one reset button
  • One power and two status LEDs
  • On board voltage regulator 3.3V with up to 800mA current
  • Single power supply: 5V DC required
  • Power supply filtering capacitor
  • 18.432 Mhz crystal on socket
  • Extension header
  • PCB: FR-4, 1.5 mm (0,062"), soldermask, silkscreen component print
  • Dimensions: 100 x 80 mm (3.94 x 3.15")

SAM7-P64 DEVELOPMENT BOARD FOR AT91SAM7S64 ARM7TDMI-S MICROCONTROLLER



SAM7-P64 DEVELOPMENT BOARD FOR AT91SAM7S64 ARM7TDMI-S MICROCONTROLLER

FEATURES
  • MCU: AT91SAM7S64 16/32 bit ARM7TDMI™ with 64K Bytes Program Flash, 16K Bytes RAM, USB 2.0, RTT, 10 bit ADC 384 ksps, 2x UARTs, TWI (I2C), SPI, 3x 32bit TIMERS, 4x PWM, SSC, WDT, PDC (DMA) for all peripherals, up to 60MHz operation
  • Standard JTAG connector with ARM 2x10 pin layout for programming/debugging with ARM-JTAG
  • USB connector
  • UEXT connector
  • Two channel RS232 interface and drivers
  • SD/MMC card connector
  • Two buttons
  • Trimpot connected to ADC
  • Thermistor connected to ADC
  • Two status LEDs
  • On board voltage regulator 3.3V with up to 800mA current
  • Single power supply: 6V AC or DC required
  • Power supply LED
  • Power supply filtering capacitor
  • RESET circuit
  • RESET button
  • 18.432 Mhz crystal on socket
  • Extension headers for all uC ports
  • PCB: FR-4, 1.5 mm (0,062"), soldermask, silkscreen component print
  • Dimensions: 120 x 80 mm (4.7 x 3.15")

SAM7-P256 DEVELOPMENT BOARD FOR AT91SAM7S256 ARM7TDMI-S MICROCONTROLLER


SAM7-P256 DEVELOPMENT BOARD FOR AT91SAM7S256 ARM7TDMI-S MICROCONTROLLER


FEATURES
  • MCU: AT91SAM7S256 16/32 bit ARM7TDMI™ with 256K Bytes Program Flash, 64K Bytes RAM, USB 2.0, RTT, 10 bit ADC 384 ksps, 2x UARTs, TWI (I2C), SPI, 3x 32bit TIMERS, 4x PWM, SSC, WDT, PDC (DMA) for all peripherals, up to 60MHz operation
  • Standard JTAG connector with ARM 2x10 pin layout for programming/debugging with ARM-JTAG
  • USB connector
  • UEXT connector
  • Two channel RS232 interface and drivers
  • SD/MMC card connector
  • Two buttons
  • Trimpot connected to ADC
  • Thermistor connected to ADC
  • Two status LEDs
  • On board voltage regulator 3.3V with up to 800mA current
  • Single power supply: 6V AC or DC required
  • Power supply LED
  • Power supply filtering capacitor
  • RESET circuit
  • RESET button
  • 18.432 Mhz crystal on socket
  • Extension headers for all uC ports
  • PCB: FR-4, 1.5 mm (0,062"), soldermask, silkscreen component print
  • Dimensions: 120 x 80 mm (4.7 x 3.15")