Friday, June 26, 2015

Thermoelectric Cooler Peltier 8.5V, 14.9W

Module temperature producing hot and cold temperatures.

- Power supply: 8.5V (max.)
- The input current: 3A (max.)
- Power: 14.9 W
- Dimensions: 30x30x3.5 mm
- One side generates heat and produces cold side

more info:

Thermoelectric Cooler Peltier 5.8V, 13.7W

Module temperature producing hot and cold temperatures

- Power supply: 5.8V (max.)
- The input current: 4A (max.)
- Power: 13.7W
- The difference in temperature: 68 deg C (max.)
- Dimensions: 25x25x3.7 mm
- One side generates heat and produces cold side

more info:

Thermoelectric Cooler Peltier 3.75V, 7W

Module temperature producing hot and cold temperatures.

- Power supply: 3.75V (max.)
- The input current: 4A (max.)
- Power: 7W
- The difference in temperature: 68? (Max.)
- Dimensions: 20x20x3.5 mm
- One side generates heat and produces cold side

more info:


OpenCM9.04-C have been using 32bit ARM Cortex-M3.
Users can choose the software that will be used, whether it RoboPlus or Robotis OpenCM.
For TTL connector, OpenCM9.04-C uses 2 XL-Type TTL connectors.
Terminal JTAG / SWD can be used for the development of commercial programs.

Power supply 5V - 16V (USB 5V, 7-12V Dynamixel)
Features 8 Timer, ADC 10 pin (12 bit), Flash 128 Kb, 20 Kb SRAM, Clock 72 MHz
Dimensions of 27 mm x 66.5 mm
Based microcontroller / microprocessor STM32F103CB (ARM Cortex-M3)
Total port i / o 26
Port USB interface, USART, SPI, I2C
Robotis bootloader OpenCM
Micro USB programming port type B

Thursday, June 25, 2015

EasyVR Shield 3.0 - Voice Recognition Shield

EasyVR 3.0 is a multi-purpose speech recognition module designed to add versatile, robust and cost effective speech and voice recognition capabilities to virtually any application. EasyVR is the third generation version of the successful VRbot module and builds on the features and functionality of its predecessor. In addition to the EasyVR 3.0 features like 28 user-defined Speaker Dependent (SD) triggers and 28 custom speaker independent (SI) commands, the shield has additional connectors for the microphone input, an 8 ohm speaker output, audio line-out/headphone jack, and access to the I/O pins of the EasyVR module. A programmable LED is also included to show feedback during recognition tasks.


A 28 custom speaker independent (SI) commands (available in US English, Italian, Japanese, German, Spanish, and French and more) for ready to run basic controls.
Supports up to 32 user-defined Speaker Dependent (SD) triggers or commands (any language) as well as Voice Passwords.
SonicNet to control one or more EasyVR 3.0s wirelesly with sound tokens generated by the module or other sound source
DTMF tone generation
Easy-to-use and simple Graphical User Interface to program Voice Commands to your robot.
Compatible with Arduino boards that have the 1.0 Shield interface (UNO R3) and legacy boards including:
  • Arduino Duemilanove
  • Arduino Uno
  • Arduino Mega
  • Arduino Leonardo
  • Arduino Due
Module can be used with any host with an UART interface (powered at 3.3V - 5V).
Supports direct connection to the PC on main boards with a separate USB/Serial chip and a special software-driven “bridge” mode on boards with only native USB interface, for easy access by the EasyVR Commander.
Simple and robust serial protocol to access and program the module through the host board.

Make your own sound tables using Sensory QuickSynthesis4 tool.
Supports remapping of serial pins used by the Shield (in SW mode).
The new EasyVR GUI includes a command to process and download custom sound tables to the module (overwriting existing sound table)
Provides a 3.5mm audio output jack suitable for headphones or as a line out
8 ohm speaker output
Access to EasyVR I/O pins
Programmable LED to show feedback during recognition tasks
Arduino Libraries provided

Handy silver solder wire pen

To produce good soldering results it is necessary to lead a good quality too.
Tin solder product chin is one of the best.
This product contains 3% silver, 0.5% copper and 96.5% lead (SAC305) in accordance with JEITA standards. This tin has electrical conductivity is very good.

- Diameter: 0.8 mm.
- Flux: LC-1 2%.
- Low resistance.


What is an electronic brick? An electronic brick is an electronic module which can be assembled like Lego bricks simply by plugging in and pulling out. Compared to traditional universal boards and circuit modules assembled with various electronic components, electronic brick has standardized interfaces, plug and play, simplifying construction of prototype circuit on one’s own. There are many types of electronic bricks, and we provide more than twenty types with different functions including buttons, sensors, Bluetooth modules, etc, whose functions cover from sensor to motor drive, from Ethernet to wireless communication via Bluetooth, and so on. We will continue to add more types to meet the various needs of different projects.

Electronic brick of soil moisture sensor is mainly used to detect the moisture content in the soil. The control board can get the moisture value or threshold in the soil via analog or digital pins.

Brick Type Sensor Brick
Brick Interface 4PIN Parallel
Brick Power Supply 5V
Board Size 71.65 X 24.00 X 1.6mm
LED Color No
Weight 22.00g
Model IM121017001

Wednesday, June 24, 2015

ROBOTIS PREMIUM Programming Guide

In this guide, explained about how to use the software Robotis called RoboPlus specifically designed to program the robot.

In this book there are also:
- General description of the sections contained in the Robotis Premium Kit.
- Step-by-step installation and use of software RoboPlus, such as RoboPlus Task Manager and RoboPlus RoboPlus Motion.
- There are about 50 issues which could be used for educational purposes.

Low cost servo S05NF

Low cost servo S05NF is  high-quality servo, relatively inexpensive and simple to all the mechatronic needs. This small servo has a standard 3 pin power, control cables and mounting hardware.
- Rotational speed at 4.8V: 0:20 sec / 60 degrees
- Rotational speed on 6V: 0:18 sec / 60 degrees
- Maximum Torque 4.8V: 2.8 kg / cm (19.6 oz / in)
- The maximum torque 6V: 3.2 kg / cm (19.6 oz / in)

Tuesday, June 23, 2015

Dynamixel RX-28 Bulk 6pcs

Robot Artificial Dynamixel servo actuator is not just a digital servo. Servo is able to detect the speed, temperature, shaft position, voltage and load.
All settings made by the position sensor and the microcontroller is embedded in this servo.

Dimensions of 35.6mm x 50.6mm x 35.5mm
Working voltage 12V - 18.5V (14.8V recommended)
Current consumption of 50 mA (standby)
The maximum rotary speed of 85 rpm (at 18.5V - without load)
Type rotation 0 ° - 300 ° / Endless turn
The maximum torque of 3.7 N.m (on 18.5V, 1.9a)

ATTEN ATF05C 5MHz Fuction Generator

ATTEN ATF05C 5MHz Fuction Generator

Function generator has been using DDS technology (Direct Digital Synthesis).
Has a simple front panel design and optimized so convenient to use.
Display uses TFT screen which is very helpful when reading and observation.

- Technology Direct Digital Synthesis (DDS), 2 independent output channels, LCD display (TFT).
- 32 standard waveforms or build-in fixed waveforms.
- Minimum stable output waveform: 1mV (50).
- Multiple modulation functions: FM, FSK, ASK, PSK.
- Frequency sweep, amplitude sweep and burst functions.
- Protection against overvoltage, overcurrent, output short-circuit and reverse voltage.
- Optional configurations: Frequency Counter, Power Amplifier.

ATTEN GA1102CAL Digital Storage Oscilloscope

ATTEN GA1102CAL Digital Storage Oscilloscope 
100MHz, 1Gsa/s, 2 Ch, 7" LCD Screen

This oscilloscope has a shape that is relatively small, making it easy to be moved as needed.
2-channel 100 MHz digital scope has a sampling rate of 1G Sa / s real-time.
Can perform data storage waveforms via a USB port (can use a USB flash drive).
There is also a USB-A port on the rear of the oscilloscope for a relationship with a computer (PC), where it is required for storage / further data processing.

- 2-Channel, 100MHz.
- 7 "LCD Screen (TFT).
- 1G Sa / s real-time sampling rate.
- 50G Sa / s Equivalent Sampling Rate.
- 40K / CH Memory Depth.
- Edge, Pulse, Video, Slope, Alternative, and Delay Trigger Functions.
- Digital Filter and Waveform Recorder Functions.
- Pass / Fail Function.
- Save and Recall Setup / Waveform / CSV Data on USB Flashdrive.
- Save or Print Waveform Image Captures.
- On-Screen Menu System.
- RS-232 Connector.
- Remote-Control PC with Included Software.

- Input Voltage: 100-240VAC.

Saturday, June 20, 2015


Robotis Dream level 3 comes with 12 chapter of assembly , application of principles and problem solving. This kit teaches pulley principles, other equipment, programming and also how to utilize all the robot peripherals.


  • level 3 workbook with 12 robot examples
  • 2 servo motors that can be used for wheel mode or joint mode

Friday, June 19, 2015

URM06-UART Ultrasonic sensor

Ultrasonic sensors emit ultrasonic pulses, and by measuring the time of ultrasonic pulse reaches the object and back to the transducer, the distance of sensor from the target object is calculated. They are widely used in detecting displacement, thickness, distance, water level, material level and transparent objects.
The URM06 - UART Ultrasonic sensor provides very short to long-range detection and ranging from 20cm ~ 10m, comes in a compact, robust PVC housing and matches 35mm electrical pipe mounting. It comes with UART interface and works at high output acoustic power. The ultrasonic sensor detects objects from 20cm to 1000cm and provides range information with 1cm resolution. The URM06 has 15 degree beam angle which has excellent receive sensitivity. And it works best when detecting soft targets. The similar sensors are widely used in professional mobile robot systems such as Pioneer robots.
The URM06 series sensors are the best ultrasonic sensor available in the market regarding its beam angle, senstivity and accuracy.


  • Working Voltage: 6V-12V (5V is acceptable but not recommended)
  • RPeek Current: 2A
  • Interface: UART
  • Working Frequency: 49.5KHZ
  • Working Temperature: -10℃ ~ +70℃
  • Detecting Angle: 15°(-6dB)
  • Detecting Range: 20cm ~ 10m
  • Size: 50mm(diameter)*43mm(length)
  • Mounting Thread Diameter: 35mm
  • Weight: 50g
  • ated Current: 16mA


  • robot navigation
  • obstacle avoidance
  • measuring distance devices
  • engineering measurement tools
  • industrial control system

Wednesday, June 17, 2015


4.3" Diablo16 Arduino Display Module Pack

The uLCD-43DT-AR is an Arduino Display Module Pack, which includes a uLCD-43DT 4.3" LCD Display with Resistive Touch, a 4D Arduino Adaptor Shield and 5 way interface cable.

The uLCD-43DT-AR includes an Arduino Adpator Shield which is used to interface the uLCD-43DT Display with an Arduino, to provide a quick and easy interface without any wiring hassles.

The Arduino Display Module Pack enables an Arduino user to quickly connect the 4D Arduino Adaptor Shield to their Arduino, connect the 5 way cable between the Adaptor and the Display Module, and be connected in seconds to start programming their new 4D Systems Display.

The uLCD-43DT-AR has a comprehensive ViSi-Genie Library for the Arduino, which provides a rapid programming experience for Arduino users, to create both simple and complex GUI's with ease. A Serial Library is also provided to easily interfeace to the Arduino, which prives an simple method to draw primitives such as lines, rectangles, circles and text, displaying images, playing sound and logging data to uSD card.

The Arduino Adaptor Shield utilises the Arduino's UART Serial Port and a single Digital pin

Monday, June 15, 2015

Lynxmotion SSC-32U Bluetooth Servo Controller

The Lynxmotion SSC-32U Servo Controller is a small preassembled servo controller with some big features. It has high resolution (1uS) for accurate positioning, and extremely smooth moves. The range is 0.50mS to 2.50mS for a range of about 180°. The motion control can be immediate response, speed controlled, timed motion, or a combination. A unique "Group Move" allows any combination of servos to begin and end motion at the same time, even if the servos have to move different distances. This is a very powerful feature for creating complex walking gaits for multi servo walking robots. The servo's position or movement can be Queried to provide feedback to the host computer.

There is even a 12 servo Hexapod sequencer built in. This allows complete control of all aspects of the alternating tripod gait simply by transferring a few values from the host controller. Any output pin can be used as a TTL level output. There are 8 analog inputs pins for reading sensor values, and 6 of them can be used as static or latched digital inputs, so you don't have to worry about missing a short event.

The new SSC-32U board has improved power and communication management. The board still has three terminal blocks, but the new power circuit means that most of the time you will only need to use VS1. With the new board, the logic circuits have large capacitors to protect against brownouts, and the logic has auto power select so the VL=VS1 jumper isn't needed anymore. For communication, in addition to having USB on-board, the SSC-32U has an Xbee socket for easy use with wireless devices such as XBees and Bluetooth.


  • 32 channels of 1uS resolution servo control
  • Bidirectional communication with Query commands
  • Synchronized, or "Group" moves
  • 12 Servo Hexapod Gait Sequencer built in
  • MiniSSC-II emulation, like having 4 of them

SSC-32 Servo Sequencer Utility (created using FlowBotics Studio)

The Lynxmotion SSC-32 Servo Controller board can be easily controlled with the new SSC-32 Servo Sequencer Utility. It is available as a free downloadable utility which makes it easy to experiment with robotics and animatronics. It can be found in the Useful Links section.

This utility is an example of the type of program which can be built using FlowBotics Studio (Download) , which includes this program as an open source demo project. The SSC-32 Servo Sequencer Utility program enables you to easily move servo motors, calibrate their position, store and playback motion sequences, upgrade the SSC-32 firmware and more.


  • Firmware: 2.50USB
  • Microcontroller: Atmel ATmega328P
  • External EEPROM: 512 kbit
  • Internal Sequencer: 12 Servo Hexapod (Alternating Tripod)
  • Serial input: USB, 3.3V Xbee, TTL UART, N81
  • Baud speeds: 9600, 38.4k, and 115.2k selectable via push button; other speeds through register configuration
  • RC PWM Outputs: 32 (Servo or TTL)
  • Inputs: 8 (8 Analog, 6 Static or Latching Digital)
  • PC interface: USB Mini B (cable included)
  • Microcontroller interface: 0.1" Header
  • Servo control: Up to 32 servos plug in directly
  • Servo type supported: Futaba, Hitec and general 0.1" spaced 3-pin R/C
  • Servo travel range: 0.5ms to 2.5ms (most RC servos travel 180°)
  • Servo resolution: 1uS (~0.09° for 180 degree servos, if servo permits)
  • Servo speed resolution: 1uS / Second
  • Servo motion control: Immediate, Timed, Speed or Synchronized.
  • PC board size: 3.0" x 2.3" (mounting holes set 0.15” from each edge)
  • Logic power: auto select between VS1 and VL
  • VS peak current: max 15 amps per side
  • VS steady current: max 3-5 amps per side recommended

Friday, June 12, 2015

Cadik WG088A screwdriver set

Cadik WG088A screwdriver set


  • SL 2.0X60 (-)
  • SL 2.5X60 (-)
  • SL 3.0X60 (-)
  • PH 00X60 (+)
  • PH 0x60 (+)
  • PH 1x60 (+)

Wednesday, June 10, 2015

Silicon labs ToolStick Debug Adapter (TOOLSTICKDA)

The ToolStick Debug Adapter, in conjunction with a ToolStick Base Adapter, provides an interface between the PC’s USB port and the target device’s in-system debug/programming circuitry. The ToolStick Debug Adapter can be used to program and debug a standard Silicon Labs MCU development board.

OrangeRX T-SIX 2.4GHz DSM2 6CH Programmable Transmitter

The OrangeRx T-SIX is a brilliant, fully programmable 6 channel 2.4GHz DSM2 transmitter that is loaded with features. Covering just about everything for both fixed wing and helicopters, the T-SIX supports multiple wing types, multiple swashplate types, channel mixing, subtrim, exponential, dual rates, travel adjustment, servo monitor, graphic pitch/throttle curves, 10 model memory .

• Compatible with all DSM2 Receivers
• 6 Channel Operation
• Supports 3 Wing/Tail Mixes (Dual Aileron/Elevon/V-Tail)
• Supports 2 Swashplate Types (1 Servo 90°/CCPM 120°)
• 5 Point Graphic Pitch/Throttle Curves
• Adjustable Gyro Gain
• Dual Rates and Exponential
• Servo Reversing (all 6 channels)
• Channel Mixing
• Sub Trim and Travel Adjust
• Flaps and Differential
• Throttle Hold
• Large Backlit LCD Display
• 10 Model Memory
• Adjustable RF Power Output (US and EU Selectable via Menu)
• Integrated Timer
• Adjustable Stick Length
• Trainer Port
• Supports Alkaline, NiMH, NiCd, LiPo and LiFe batteries

Frequency: 2.4GHz
Modulation: DSM2
No. of Channels: 6
Model Memory: 10
Stick Mode: Mode 2 (left stick throttle)

OrangeRx T-SIX 2.4GHz DSM2 6CH Programmable Transmitter (Mode 2 version)
User Manual

2.4GHz DSM2 compatible receiver
4 x AA batteries or 2S transmitter battery w/JST plug


Standard DMM with Direct Current Input for General Applications

The Hioki DT4200 Digital Multimeter Series consist of a complete lineup of 9 models ranging from professional to industrial to pocket meters, delivering a super fast response rate and safety features that take electrical testing to a higher level. The DT4252 is a digital multimeter designed specifically for general purpose testing, with ±0.3% DC V accuracy, direct current input and wide 40 Hz to 1kHz bandwidth.

  • DC voltage 600.0 mV to 1000 V, 5 ranges, Basic accuracy: ±0.3 % rdg. ±5 dgt.
  • AC voltage 40 to 500 Hz 6.000 V to 1000 V, 4 ranges, Frequency characteristics: 40 Hz - 1 kHz
  • Basic accuracy: ±0.9 % rdg. ±3 dgt. (True RMS, crest factor 3)
  • Resistance 600.0 Ω to 60.00 MΩ, 6 ranges, Basic accuracy: ±0.7 % rdg. ±5 dgt.
  • DC current 6.000 A / 10.00 A, 2 ranges, Basic accuracy: ±0.9 % rdg. ±5 dgt.
  • AC current, 40 to 500 Hz 6.000 A / 10.00 A, 2 ranges, Basic accuracy: ±1.4 % rdg. ±3 dgt. 
  • (True RMS, crest factor 3, 40 Hz to 1kHz)
  • AC Current (use with Clamp on probes) 40 to 1k Hz N/A
  • Temperature (use with DT4910) N/A
  • Voltage detection N/A
  • C (capacitance) 1.000 μF to 10.00 mF, 5 ranges, Basic accuracy: ±1.9 % rdg. ±5 dgt.
  • Frequency AC V, AC A measurement: 99.99 Hz (5 Hz or more) to 9.999 kHz, 3 ranges, 99.99 kHz (only for AC V)
  • Basic accuracy: ±0.1 % rdg. ±1 dgt.
  • Continuity check Continuity threshold [ON]: 25 Ω or less (Indicate buzzer sound, red LED), [OFF]: 245 Ω or more
  • Response time: 0.5 ms or more
  • Diode test Open terminal voltage: 5.0 V or less, Testing current 0.5 mA or less, 
  • Threshold of forward voltage: 0.15 V to 1.5 V
  • Other functions Filter function, Display value hold, Auto hold, Max/Min/Average value display, Relative display, Auto-power save, USB communication (option)
  • Display Main and Sub displays: 4-digits LCD, max. 6000 digits, bar graph
  • Display refresh rates 5 times/s (Capacitance measurement: 0.05 to 5 times/s, depending on measured value, Frequency: 1 to 2 time/s, Temperature: 1 time/s )
  • Power supply LR03 alkaline batteries ×4, Continuous use: 130 hours (back light OFF)
  • Dimensions and mass 84 mm (3.31 in)W × 174 mm (6.85 in)H× 52 mm (2.05 in)D, 390 g (13.8 oz) (with batteries and holster)
  • Accessories Test lead L9207-10 ×1, Holster ×1, Instruction manual ×1, LR03 alkaline battery ×4

Monday, June 08, 2015


NuTiny-SDK-NUC240 is a special development tool for NUC240 NuMicro series.
This board has two parts, namely NuTiny-EVB-NUC240 and Nu-Link-Me.
NuTiny-EVB-NUC240 serves as an evaluation board and Nu-Link-Me as the debug adapter.
With the Nu-Link-Me, then the user is no longer need additional ICE or other debugging.
Dev This tool uses MCU NUC240VE3AE (Arm Cortex M0 - 50 MHz).


  • 5 VDC power supply
  • Based microcontroller / microprocessor NUC240VE3AE (Arm Cortex M0 - 50 MHz)
  • Total port i / o 79 pin
  • Port interface UART, SPI, I2C, Micro USB, LIN, CAN, I2S
  • Micro USB programming port


Board NuTiny-SDK-NUC472 this is a special development tool for NuMicro series ?? NUC472.
Users can use this board as a tool for the development of a project and verify the application program.
This board consists of two parts, namely NuTiny-EVB-NUC472 and NuLink-Me.
NuTiny-EVB-NUC472 own work as an evaluation board, while NuLink-Me as the debug adapter.
Therefore, users no longer need ICE or
debugging module.
MCU used is NUC472HI8AE have embedded Arm Cortex M4 core with DSP and FPU that can work using up to 84 MHz clock.
Applications that can be applied using this board include:
- Automation in industrial / home.
- PLC.
- Inverter.
- System security / alarm.
- Portable Data collector.
- Portable RFID Reader.
- Motor control.
- POS.
- Smart Card Reader.

3.3VDC power supply
Based microcontroller / microprocessor NUC472HI8AE
Total port i / o 144 pin
Port interface UART, SPI, I2C, Micro USB, LIN, CAN, SC, I2S, Ethernet 10/100
Micro USB programming port

Friday, June 05, 2015

OpenCM9.04-Accessory Set

Connectors for the OpenCM9.04-A

2x 1x20 2.54 mm pin header
2x 1x20 2.54 mm box header
2x 2x5 2 mm pin header
1x 1x4 2 mm pin header
4x MOLEX-5267-03
4x MOLEX-53253-0370
2x 20010ws-02
1x 20010ws-04
1x 2.54 mm INCA-2-SWITCHS
1x USB Micro-B cable

Arduino 9 Axes Motion Shield

The Arduino 9 Axes Motion Shield is based on the BNO055 absolute orientation sensor. The BNO055 is a System in Package (SiP), integrating a triaxial 14-bit accelerometer, a triaxial 16-bit gyroscope with a range of ±2000 degrees per second, a triaxial geomagnetic sensor and a 32-bit microcontroller running the BSX3.0 FusionLib software. The sensor features three-dimensional acceleration, yaw rate and magnetic field strength data each in 3 perpendicular axes. It also provides the sensor fusion signals such as Quaternion, Euler angles,Rotation vector, Linear acceleration and gravity vector.

In addition, it incorporates an intelligent interrupt engine, which allows for triggering interrupts based on slow or no motion recognition, any motion (slope) detection and high-g-detection.The shield is TinkerKit compatible, which means you can quickly create projects by plugging TinkerKit modules to the board.

The Arduino 9 Axes Motion Shield has no power jack and is powered only when attached to an Arduino board.

Input and output: 
The shield features several TinkerKit input/output and communication interfaces. Connecting TinkerKit modules can simplify the creation of a project or a prototype.

Physical characteristics: 
The maximum length and width of the 9 Axes Motion Shield PCB are 2.7 and 2.1 inches respectively. Four screw holes allow the board to be attached to a surface or case. Note that the distance between digital pins 7 and 8 is 160 mil (0.16"), not an even multiple of the 100 mil spacing of the other pins.

The Arduino 9 Axes Motion Shield is compatible with Uno, Yùn, Leonardo, Ethernet, Mega and Due boards. When using the Arduino 9 Axes Motion Shield, be sure to solder the Interrupt bridge and Reset bridge in the correct position depending on the board used.

The 9 Axes Motion Shield can be programmed with the Arduino software.

- Triaxial 14-bit accelerometer.
- 16-bit Triaxial gyroscope with a range of ± 2000 degrees per second.
- Triaxial geomagnetic sensor.
- 32-bit microcontroller that runs the software BSX3.0 FusionLib.

This Shield also provides the combined signals from multiple sensors such as quaternion, Euler angles, rotation vector, linear acceleration and gravity vector.

Arduino Zero Pro - 32 bit Cortex M0 Arduino with Debug Interface

The new Arduino Zero Pro board, the more creative individual will have the potential to create one’s most imaginative and new ideas for IoT devices, wearable technologies, high tech automation, wild robotics and other not yet thinkable adventures in the world of makers.

The Arduino Zero Pro represents a simple, yet powerful, 32-bit extension of the Arduino UNO platform. The board is powered by Atmel’s SAMD21 MCU, featuring a 32-bit ARM Cortex® M0 core. With the addition of the Zero board, the Arduino family becomes larger with a new member providing increased performance. 

The power of its Atmel’s core gives this board an upgraded flexibility and boosts the scope of projects one can think of and make; moreover, it makes the Zero Pro the ideal educational tool for learning about 32-bit application development. 

Atmel’s Embedded Debugger (EDBG), integrated in the board, provides a full debug interface with no need for additional hardware, making debugging much easier. EDBG additionally supports a virtual COM port for device programming and traditional Arduino boot loader functionality uses.

  • Microcontroller: ATSAMD21G18, 48pins LQFP
  • Operating Voltage: 3.3V
  • Digital I/O Pins: 14, with 12 PWM and UART
  • Analog Input Pins: 6, 12-bit ADC channels
  • Analog Output Pins: 1, 10-bit DAC
  • DC Current per I/O Pin: 7 mA
  • Flash Memory: 256 KB
  • SRAM: 32 KB
  • EEPROM: up to 16 KB by emulation
  • Clock Speed: 48 MHz
  • 53mm x 70mm x 14mm / 2.1" x 2.8" x 0.6"

Wednesday, June 03, 2015

Reusable Wristband UHF RFID Tag

The Wristband RFID tag can be reused and is widely used for applications:
- Supervision of inmates.
- The sale of garments. (retails)
- Etc.

- Communication Protocol: ISO18000-6C (EPC Class 1 Gen 2)
- Data Security: 10 years.
- Delete / Write: 100,000 times.
- Working temperature: -40°C ~ +70°C


  • Operating frequency 860 MHz ~ 960 MHz
  • Reading distance 10cm ~ 5m (depending on the strength of the antenna)

Disposable Wristband UHF RFID Tag

This tag RFID wristbands are disposable and are widely used for applications:
- Packaging in airports.
- Serves as an admission in places of entertainment / excursions.
- Tracking of patients in hospitals.
- Etc.

- Communication Protocol: ISO18000-6C (EPC Class 1 Gen 2)
- Data Security: 10 years.
- Delete / Write: 100,000 times.
- Working temperature: -40°C ~ +70°C

Technical parameter
Communication ProtocolISO18000-6C(EPC Class 1 Gen 2)
Operating Frequency860MHz~960MHz
Data Retention10years
Erase-Write times100 thousands times
Working Range10cm~5m(depends on antenna gain)
Dimension4.8 in×1.3 in×0.5 in Or 11.5 in×1.3in×0.5in
Operating Temperature-40℃~+70℃
Storage Temperature-60℃~+80℃