Saturday, December 31, 2016

PCA9539DBR chip

PCA9539DBR is a 16-bit Low-Power I / O expander designed with features such as interrupt output, reset and configuration register. This IC can be controlled with a microcontroller using the I2C interface.
specifications:
- Power Supply: 2.3 V - 5.5 V
- Frequency: 400 KHz
- Interface: I2C, SMBus
- Number of I / O: 16 I / O
- Packaging: SSOP-24
- Features: Interrupt Output, 5 V tolerant I / O Port, Polarity Inversion Register etc.

C8051F410-GQ micro chip

8-bit microcontroller based CPU 8051 production of Silicon Labs. There are 50 instructions that can be executed in two beats oscillation. Fully compatible with the MCS-51 orders packaging LQFP32

TLV1117CKCS regulator

TLV1117CKCS an LDO voltage regulator that is capable of converting voltage into a voltage up to 15 VDC 1:25 - 13.75 VDC which can be customized to user requirements. The voltage regulator can be applied to the power supply circuit, the engine Point-of-Sale (PoS), medical devices and health, and still many other applications.

TXS0102DCTR chip

TXS0102DCTR a voltage translator IC 2-bit configuration with bi-directional (two-way) that can be used to balance the digital switching compatibility at system voltages mixture. This TXS0102DCTR uses 2 separate power supply, which port A supportive working voltage between 1.65 V - 3.6 V, while the port B to support the working voltage of 2.5 V - 5.5 V. This TXS0102DCTR normally applied to the I²C / SMBus, GPIO, UART , and so forth.

Specification:
- Working voltage: 1.65 - 3.6 V (port A), 2.5 - 5.5 V (port B)
- Data Rate: 24 Mbps (push-pull), 2 Mbps (open drain)
- Mounting Type: SMD / SMT
- Packaging: SSOP-8
- Working temperature: -40 ° C - 85 ° C
- Applications: I²C / SMBus, GPIO, UART
- Features: ESD Protection

6N136 optocoupler

6N136 is a transistor optocoupler with high-speed data rates of 1 Mbps. This optocoupler capable of producing 2500 Vrms isolation voltage and power dissipation of 100 mW.

Specification:
- Packaging: PDIP-8
- Data Rate: 1 Mbps
- Number of Channels: 1 Channel
- Output Type: Phototransistor
- Isolation Voltage: 2500 Vrms
- Forward Voltage: 1.45 V
- Forward Flow: 16 mA
- Feedback Voltage: 5 V
- Disapasi Power: 100 mW
- Flow Transfer Ratio: 27%
- Working Temperature: 0 ° C - 70 ° C
- Flow Collector: 8 mA (max)
- Output Current: 8 mA

TL7705ACD

TL7705ACD a power supply supervisor ICs are designed to work as a reset controller on micro-computer systems and microprocessors. This IC will be monitoring the voltage on the power supply, and in case of under-voltage in the circuit of this IC automatically resets at the rangaian. IC of this type are frequently found on computers, tablets, smartphones, music players, servers, and so forth.

Specification:
- Voltage Peak: 4:55 V
- Total Input: 1 Input
- Output Type: Active High, Active Low, Open Drain
- Manual Reset: Yes
- Supply Voltage: 3-18 V
- Working Temperature: 0 ° C - 70 ° C
- Feature: Internal Hysterical
- Workflow: 800 uA
- Peak Over-voltage: 4.6 V
- Peak Under-voltage: 4.5
- Pause Reset: Can be programmed
- Mounting Type: SMD / SMT
- Packaging: SOIC-8

Friday, December 30, 2016

HT3101 Electric Strike

Electric door lock is made using high-quality electromagnetic material in order to provide optimal security in your building. This electric door lock can be applied on glass doors, stainless steel doors, wooden doors, and various other types of doors.

Specification:
- Input Voltage: 12 VAC
- Input Current: 800 mA
- Dynamic Flow: <800 ma="" p="">
- Power: 10 W
- Created using electromagnetic high-quality materials to produce optimal protection in your building.
- Can be used as access control for glass doors, stainless steel doors, wooden doors, as well as other types of doors.

DIP Switch slide type 6P SMT

DIP switch 6 pin capacitance 5 pf. It is suitable when used as a switch switching on a small PCB board.

Dot Matrix 2.4inch Ultra Bright Amber 5x7 tipe N

A dot matrix display panel (DMD) type N with a width of 2.4. DMD panel has a resolution of 5x7 with a total of 35 pieces of LEDs which each LED can emit light amber (yellowish orange). It is suitable as a medium for displaying digital clock, billboards, running text, moving sign, and others.

7 Segment 3 Digits 0.5inch Ultra Bright Green Color Common Cathoda J type

7 is a segment of type A with a width of 0.5 inch panel. 7 This segment consists of a 3-digit number and can emit a green color. It is suitable when applied to display the parameter numbers on the machine timer / timer, machine timer / counters, industrial machinery, and so forth.

A3988SEVTR-T motor driver chip

A3988SEVTR-T is a motor driver IC DMOS full-bridge technology that is capable of controlling up to 2 stepper motors or four DC motors. Each full-bridge driver is able to drain current is 1.2 amperes at a voltage of 36 volts. A3988SEVTR-T also been equipped with the internal PWM current regulator and a Digital-to-Analog-Converter 2-bits that allow stepper motors to be controlled in the mode full step, half step or a quarter step and DC motor working in forward or reverse mode.

Specification:
- Compatibility Motor: Bipolar (stepper motor) and brushed DC (DC motors)
- Configuration Output: 8x Half-Bridge
- Interface: Parallel
- Technology: DMOS
- Resolution: 1, 1/2, 1/4
- Applications: Robotics, automotive, and others
- Output Current: 1.2 A
- Supply Voltage: 3 - 5.5 V
- Load Voltage: 8-36 V
- Working temperature: -20 ° C - 150 ° C
- Mounting Type: SMD / SMT
- Packaging: 36-VFQFN

CP2110-F01-GM USB-TO-UART

CP2110-F01-GM IC HID USB-TO-UART BRIDGE 24QFN
CP2110 is a converter USB-to-UART that provides smart solutions for those who want to convert RS-232 to USB without requiring a lot of additional electronics components. CP2110 controller integrate full-speed USB 2.0, USB transceiver, oscillator, one-time programmable ROM, and a UART in a 24-pin QFN chip berkemasan. In addition CP2110 also compatible with several popular operating systems such as Windows, Mac OS, and Linux so you can minimize the risk of device compatibility.

Specification:
- Protocol: USB
- Speed: 12 Mbps (USB 2.0)
- Converter: USB - UART
- Interfaces: UART
- Baud Rate: 300 bps - 1 Mbps (UART)
- Standard: USB 2.0
- GPIO: 10 GPIO
- Working Voltage: 1.8V - 3.6 V
- Workflow: 11.3 mA
- Working temperature: 40 ° C - 85 ° C
- Packaging: QFN-24

ADXL335BCPZ accelerometer sensor

ADXL335BCPZ a 3-axis accelerometer sensor with super small size and low power consumption. This sensor can be used to measure the degree of slope (tilt) of an object, vibration, motion, and shocks in the range of 3 G. acceleration sensor accelerometer is widely used in game consoles, smartphones, image stabilizer in the camera, health and medical devices, and more other applications.

Specification:
- Output Type: Analog
- Number of axis: 3-axis
- Axis: X, Y, Z
- Range Acceleration: 3 G
- Resilience Shocks: 10,000 G (max)
- Sensitivity: 300 mV / G
- Bandwidth: 1.6k Hz (X, Y), 550 Hz (Z)
- Working Voltage: 1.8 - 3.6 V
- Features: Bandwidth can be adjusted according to user needs
- Working temperature: -40 ° C - 85 ° C
- Mounting Type: SMD / SMT
- Packaging: 16-LQFN

1/2 inch Ball Caster Plastic Kit

ball caster kit 1/2 inch diameter plastic with a housing made of ABS plastic which has also been equipped with 2 sets of nuts and bolts to attach the caster's ball into an object. Ball caster is very properly used in the fields of robotics.

Specification:
- Diameter: 0:58 inches
- Material: Plastic
- Height: 12:53 inches
- Applications: Robotics

Web-Based Programmable Alarm

Programmable Alarm is a tool that is used to provide a warning or notification in accordance with the timetable that has been set. Warning or notification can be the voice / audio obtained via RCA connections or electric bell and other electronic devices through a relay. Programmable Alarm This tool provides 30 lines of timing per day for 1 week can be arranged via a LAN connection using a Web Browser. This tool can also be connected to an external digital clock display with RS485 connection or HDMI. Programmable alarm is very suitable for those who often have regular mobility outside the city.

Programmable Alarm provides:
- RS485 serial communication for connection to an external time display (optional HDMI).
- Output relays are used to control other electronic devices.
- Output in the form of RCA stereo audio output.
- Provides LED indicator and relay alarm use.
- WEB to control or regulate Programmable Alarm.
- Internet connection using ethernet.
Features provided WEB Programmable Alarm, among others:
- WEB Programmable Alarm provides 30 lines of the timing for the alarm goes off in the first week (Monday through Sunday).
- Provide 2 pieces relay settings (optional up to 4 relay). Relays can be set automatically kind of alarm or controlled manually (using the button).
- The time lapse relay used can be set within an interval of 1 to 60 seconds.
- Alarms are used in the form of audio to mp3 or wav format.
- Provides IP configuration, netmask and gateway.
- Provides configuration time and web security.
- Provides features addition, subtraction and audio testing.

Some of these features are:
1. The ON / OFF
This button is used to turn on the alarm programmable module.
2. Input 220VAC
This input is used to connect the module with a voltage of 220 Volt AC.
3. Output RS485
This output is used to connect the module with other devices using RS485 serial communication.
4. Output Relay 1
This output is used to connect the module with other devices intercession relay. If the relay 1 in the ON mode then the other device will connect. If the relay 1 in the OFF mode then the other device will be disconnected. settings mode can be done on WEB Programmable Alarm.
5. Output Relay 2
This output is used to connect the module with other devices intercession relay. If the relay 2 in the ON mode then the other device will connect. If the relay 2 in OFF mode then the other device will be disconnected. settings mode can be done on WEB Programmable Alarm.
6. Audio Output
This output is used to connect the module with the speaker.
7. Ethernet
This output is used to connect the module to the Internet network.
8. HDMI
This output is used as a screen connection with programmable alarm
display the time.

TO-247 Black Anodized Heat Sink

The heat sink (heat sink) for the electronic components berkemasan TO-247 is made of material alumuinum.

Specification:
- Material: Aluminum
- Black
- Compatibility: TO-247
- Resistance Temperature: 3.9 ° C / W
- Dimensions: 25 x 35 x 12 mm

Iso RFID Card EM4100

EM4100 family passive RFID tag that works at a frequency of 125 KHz. This tag has a 10-digit ID that is unique and different from each other. This tag is designed to work with the RFID reader from Parallax and is perfect when applied to the access control system, building security system, automated attendance system and other similar systems.

Thursday, December 29, 2016

Genuino 101: Balance Robot kit

Genuino 101 Balancing Robot Kit is a mini version of a segway that we often see. Genuino 101 Balancing Robot Kit is a two-wheeled robot that can stand up to balance its position continuously. This robot uses Genuino microcontroller 101 as the center controlling the whole movement and a gyro sensor and accelerometer 6-axis have also been embedded in Genuino 101 as a sensor to keep his balance. In addition to the robot is also equipped with LED indicators and LCD to simplify the user in understanding the working status of the robot.
With these features, the Genuino 101 Balancing Robot Kit is ideal when used as a medium of learning about microcontrollers, robotics, and the application of the concept of PID in daily life - the day, be it for students, students and hobbyist.

Specification:
- Power Supply: Battery Turnigy Nano Tech 11.1 V 1000 mAh
- Controller: Genuino 101
- Driver: EMS 2A Dual H-Bridge
- Motor: GM250028 12V 300 RPM
- Battery Life: ± 3 hours
- Body Material: Acrylic 3 mm
- Work Terrain: Surface / flat surface (floor tiles, wooden tables, glass, etc.)
- Features: Equipped with LED indicators and LCD to facilitate understanding of robots working status

HYX029-P3 DC Gear Motor, 3-6V, 1:96, 50-220rpm

HYX029-P3 is a DC motor with gearbox that works at a voltage of between 3 V - 6 V. This motor has a 1:96 ratio gear box and able to generate the rotation speed between 50-260 RPM.

HYX-S0150 Metal Gear Servo

HYX-S0150 is metal gear, working at voltages between 4.8 V - 6 V. The servo is capable of producing a maximum torque of 16.1 kg-cm with a rotation speed of 0:16 seconds / 60 °. This servo is perfect when applied to robotics applications.

HYX-S0130F Metal Gear Digital Servo

HYX-S0130F is a standard servo bergear metal working at voltages between 4.8 V - 6 V. The servo is capable of producing a maximum torque of 14.3 kg-cm with a rotation speed of 0:16 seconds / 60 °. This servo is perfect when applied to the field of robotics.

HYX-S0090 Metal Gear Servo

HYX-S0090 is a standard servo bergear metal working at voltages between 4.8 V - 6 V. The servo is capable of producing a maximum torque of 10.2 kg-cm with a rotation speed of 0:16 seconds / 60 °. This servo is ideal when applied to the field of robotics.

HYX-3011D18MB Metal Gear Digital Servo

HYX-3011D18MB a digital servo bergear metal working at voltages between 4.8 V - 6 V. The servo is capable of producing maximum torque of 7 kg-cm with a rotation speed of 0.2 sec / 60 °. This servo is perfect when applied to the field of robotics.

HYX-3006S1 Standard Servo

HYX-3006S1 is a standard servo (180 °) working at voltages between 4.8 V - 6 V. The servo is capable of producing maximum torque of 4 kg-cm with a rotation speed of 0:18 seconds / 60 °. Servo is ideal for robotics applications.

HYX028-P2 DC Gear Motor, 1.5-6V, 1:28, 100-300rpm

HYX028-P2 is a DC motor bergear box that works at a voltage between 1.5 V - 6 V. This motor has a 1:28 ratio gear box and able to generate the rotation speed between 100-300 RPM.

HYX024-10 DC Gear Motor, 3V, 1:220, 5-10rpm

HYX024-10 a DC motor bergear box that works at a voltage of 3 V. This motor has a gear box ratio of 1: 220 and is able to generate the rotation speed between 5-10 RPM.

HYX-S3006 Standard Servo

HYX-S3006 is a standard servo (180 °) working at voltages between 4.8 V - 6 V. The servo is capable of producing a maximum torque of 1.8 kg-cm with a rotation speed of 0:14 seconds / 60 °. Servo is ideal for robotics applications.

L3G4200D gyro sensor

L3G4200D a gyroscope sensor MEMS 3-axis artificial ST Microelectronics are manufactured using CMOS technology. These sensors combine the sensory element and signal processing IC in order to get the precise angle measurement. The angle measurement results can be accessed via the SPI and I²C interface. This sensor can apply on a virtual reality device, GPS navigation systems, robotics, aviation, and others.

Specification:
- Sensor Type: Gyroscope
- Number of axis: 3-axis
- Axis: X, Y, Z
- Range: ± 250 deg / s (X), ± 500 deg / s (Y), ± 2000 deg / s (Z)
- Output Type: Digital
- Sensitivity: 70 MDPS / digit
- Interface: I²C, SPI
- Resolution: 16 bit
- Workflow: 6.1 mA
- Packaging: LGA-16
- Working Voltage: 2.4 - 3.6 V
- Acceleration: 10000 G
- Working temperature: -40 ° C - 85 ° C
- Mounting Type: SMD / SMT

HYX-S1002A Micro Metal Gear Servo

HYX-S1002A is a standard micro servo bergear metal working at voltages between 4.8 V - 6 V. The servo is capable of producing a maximum torque of 7.1 kg-cm with a rotation speed of 0:16 seconds / 60 °. Servo is ideal for robotics applications.

Smart Electric Saver 2200 - 4400W

Electric Smart Saver is a tool that serves to save power usage across all electronic devices in your home. With this tool you can save up to 30% of your monthly electricity tagiahan. The tool is composed of several capacitors and diodes that are arranged so that they can increase the ability of capacitance, resistance and inductance so as to minimize the leakage current (current loss). This tool is also 100% legal use (by decree of the minister of Public Works No. 23 / PRT / 78 on a similar device capacitor bank) so you do not have to worry about violations of the law.

Specification:
- Power Compatibility: 2200 - 4400 W
- Savings: Up to 30%
- Weight: 325.2 g

Wednesday, December 28, 2016

CONN BNC JACK STR 50 OHM CRIMP

BNC connectors with impedance of 50 ohms and a maximum frequency of 4 GHz. BNC connector is compatible with the type of cable RG-174, 188, 188A, 316, LMR-100 and M17 / 119-RG174.

Specification:
- Type Terminal: BNC
- Form: Female
- Termination: Crimp
- Impendasi: 50 Ohm
- Mounting Type: Free Hanging (In-Line)
- Compatibility: RG-174, 188, 188A, 316, LMR-100, M17 / 119-RG174
- Lock Type: Bayonet Lock
- Frequency Maximum: 4 GHz
- Packaging Color: Silver
- Body Material: Brass
- Upholstery Body: Nickel
- Contact Material: Phosphor Bronze
- Dielectric Material: Polyoxymethylene acetal
- Working Voltage: 500 V

INA2331AIPWT chip

INA2331AIPWT an instrumentation amplifier IC CMOS technology with the type of output rail-to-rail. INA2331AIPWT offers signal amplification with high accuracy and low noise. This INA2331AIPWT can be used directly to drive a sampling of the converter ADC, so it is ideal when applied to the thermocouple, medical devices (ECG, EEG, EMG), audio amplifiers, communication systems, and so forth.

ISD15116FYI LQFP32 chip

ISD15116FYI a voice recorder and player chip tech ChipCoder® of Nouvoton combined with digital compressor, comprehensive memory management, flash memory, as well as the audio signal path analog / digital integrated in a single chip. Unlike chip recorder in general, this ISD15116FYI I²S use interface that has a speed faster digital recording, higher sampling frequency, and the equivalent SNR higher than the average of other recorder chip is up to 12-bit resolution.

Specification:
- Interface: SPI and I²S
- Signal Input: Microphone
- Signal Output: Bridge Tied Load (BTL) and speakers (via interface PWM)
- Sampling frequency: 4-48 KHz
- Recording Duration: 16 minutes
- Resolution: 12-bit
- Oscillator: Internal
- Features: automatic gain control, GPIO, and volume control
- Working temperature: -40 ° C - 85 ° C
- Working Voltage: 2.7 - 3.6 V
- Mounting Type: SMD / SMT
- Packaging: 48-LQFP

Tuesday, December 27, 2016

7 Segment 2.3inch Red Color Com Anoda

2.3-inch seven segment common anode configurations. Seven segment can emit red light and is perfect when used to display the numbers on digital clocks, totalizer / counter, machine timer / timer, and so forth.

DIP Switch 8 pin Low Profile Gold

8 pin DIP switch configuration that works on voltage SPST 24 VDC and 25 mA.

Refurbished M27C256B-12FI UV-Eprom

UV-EPROM 32K Byte

STDT-1205B 5V buzzer

STDT 5V with a buzzer sound loudness level by 87 dB. Buzzer This is perfect when applied to building security systems, access control systems, industrial machinery, and so forth.

Specification:
- Working Voltage: 5 V
- Consumption Current: 30 mA
- The level of loudness: 87 dB
- Resonance Frequency: 2600 Hz
- Working temperature: -20 C ° - 85 ° C.
- Dimensions: 12 x 7.5 mm
- Weight: 1.61 gr

Monday, December 26, 2016

DKD2-621 Pushbutton Switch with lamp

Pushbutton equipped with a light red color.

  • Number of pins 8 Pin
  • Dimensions 16.7 (L) x 16.7 (L) x 34.6 (T)
  • configuration DPDT
  • Type pushbutton
  • Logic On-Off

AVR ISP 10 To 6 Converter

AVR ISP 10 To 6 Converter is an add-on to connect the AVR in-system programmer berkonektor 10 pin standard Atmel to the target board using the connector AVR ISP 6 pin standard Atmel.

specifications:
- Using a PCB header with the housing so as to minimize wiring error liaison.
- Equipped with flat ribbon cable 6 conductors for the connection of AVR ISP 6 pin.
- Can also be used to connect the AVR in-system programmer berkonektor 6 pin to the target board using ISP 10 pin connector. (With additional flat ribbon cable 10 conductors).
- Fully compatible with DT-HiQ AVR In System Programmer, DT-HiQ USB AVR ISP and AVR in-system programmer else using Atmel standard connectors.

Equipment:
- 1 piece DT-HiQ board AVR ISP 10 To 6 Converter.
- 1 set of flat cable IDC ribbon berkonektor 6 pin socket (p = 8 cm).

Friday, December 23, 2016

VNH5050ATR-E driver chip

VNH5050ATR-E is a full-bridge motor driver that is designed for applications in the automotive field. VNH5050ATR-E incorporates two high-side driver with 2 pieces of low-side switch where each switch is already equipped VIPower® M0 technology that will improve efficiency and overall performance of the device. Devices include PWM and parallel interfaces, as well as capable of controlling the output currents up to 30 amperes.

Specification:
- Compatibility Motors: Brushed DC
- Output Configuration: Half Bridge
- Interfaces: Parallel and PWM
- Technology: Power MOSFET
- Applications: Automotive
- Output Current: 30 A
- Working Voltage: 5.5 - 18 V
- Working temperature: -40 ° C - 150 ° C
- Mounting Type: SMD / SMT
- Packaging: 36-BFSOP

TS820-600FP SCR

TS820-600FP an SCR 600 V 8 A which can be applied to motor control circuits, current-limiting device, the device regulator voltage, over-voltage protection devices, and so forth.


  • Packaging TO-220-3
  • type SCR
  • Voltage - off state / vdrm 600 V
  • -gate Voltage trigger / VGT 800 mV
  • Flow - gate trigger / IGT 200 uA
  • RMS on-state current / itrms 8 A
  • Holding current 5 mA

Dot Matrix 1.28inch Bi Color (Red-Green) 8x8 type N

Dot matrix panel width of 1:28 inches with a resolution of 8x8. Panel dot matrix LED has a total of 64 pieces, each of which is capable of LED emits two types of colors: red and green.


  • Color Red and Green
  • Dimensions 2.4 inches
  • Type N
  • Number of points 8x8
  • Number of LED / 64 points

HMC1022 magnetic sensor

HMC1022 magnetoresistive magnetic sensor technology with a sensing range of ± 0.6 mT. The magnetic sensor works at a voltage of 2-25 V with a bandwidth of 5 MHz.

Specification:
- Type: Compass / magnetometer
- Technology: Magnetoresistive
- Axis: X, Y
- Reach Pengideraan: ± 0.6 mT
- Working Voltage: 2-25 V
- Output Type: Wheatstone Bridge
- Bandwidth: 5 MHz
- Working temperature: -55 ° C - 150 ° C
- Mounting Type: SMD / SMT
- Packaging: 16-SOIC

AP89341-SKDIP-G voice chip

AP89341-SKDIP-G is a high-performance IC Voice OTP manufactured with standard CMOS technology and it has been integrated with 8 Mb EEPROM. The device is capable of storing voice messages that are up to 341 seconds with a 4-bit ADPCM compression at 6 KHz sampling rate.

Specification:
- Working Voltage: 2.2 - 3.6 V
- Consumption Current: 15 mA
- Technology: CMOS
- EEPROM: 8 Mb
- Recording Duration: 341 sec @ 6 KHz sampling rate
- Frequency Stability: 5%
- Compression Type: PCM and ADPCM
- PCM: 8-bit
- Packaging: DIP-24

AP89XS-DB24P voice board

AP89XS-DB24P a demo board that is compatible with the OTP Voice IC DIP AP89341, AP89170 DIP, DIP AP89085. On these boards have also been provided socket to put OTP Voice IC, male header for the power supply, male header to the speaker, and push button to play a sound recording.

Specification:
- Power Supply: 3 V
- Interface: PWM
- Dimensions: 33 x 28 mm
- Compatibility: AP89341 DIP, DIP AP89170 and AP89085 DIP
- Pin SBT: Push button to play a sound recording

AP89XX_DBTR20A Module

AP89XX_DBTR20A a demo board for Voice OTP IC AP8942A DIP, DIP AP8921A, and AP8910A DIP. In this module has been accompanied by OTP Voice IC sockets, socket AA batteries, male header to the speakers, DIP switch, LED indicator, push button to trigger the voice OTP ICs, as well as the push button to play a sound recording.

Specification:
- Power Supply: 4.5 V
- Interface: PWM and DAC
- Rb: 470 Ohm
- Compatibility: AP8942A DIP, DIP AP8921A, and AP8910A DIP
- Pin SBT: Push button to play a sound recording