Sunday, February 26, 2017

SFH 213 photodiode

SFH 213 is made in Osram Semiconductor photodiode which has a power of 150 mW, current 80 mA, and a wavelength of 850 nm. SFH 213 is ideal apbila applied to the photo-interupter high speed, industrial control systems, robotics sensors, and so forth.

Switch Slide DP3T

DP3T slide switch with the type 6 pin SMD mounting.

FEATURES & BENEFITS

  • Packaging Tape & Reel
  • 3-position
  • Sub-miniature
  • Surface Mount


APPLICATIONS / MARKETS

  • Computer Servers / peripherals
  • consumer electronics
  • instrumentation
  • Test & Measurement


  MECHANICAL SPECIFICATIONS

  • Mechanical Life: 10,000 cycles
  • Force: 200 +/- 150 gf in both Reviews directions
  • Travel: 1.5 +/- 0.1mm each position


  ELECTRICAL SPECIFICATIONS

  • Electrical Life: 10,000 cycles
  • Contact Rating: 300mA @ 4VDC
  • Contact Resistance: 70mΩ (initial max)
  • Insulation Resistance: 100MΩ (Min @ 100VDC)
  • Dielectric Strength: 100VAC


  ENVIRONMENTAL SPECIFICATIONS

  • Operating Temperature: -10ºC to + 60ºC
  • Storage Temperature: -20ºC to + 80ºC

Saturday, February 25, 2017

UM91214ANT91214A

Chip which serves to produce pulse dialing. In the chip supplied input in the form of matrix keyboard input and RAM to store 32-digit number to redial.
Technical specifications:
- DC Power Supply: 2 - 5.5 Volt
- Power Dissipation: <500 mw="" p="">- Output: Pulse Dialing
- Output F1 Break time: 297 ms
- Output F2 Break time: 640 ms
- Support 4x4 matrix keyboard
- 32-digit capacity for redialing
- One touch redial Operation

MC145027 chip

9 data line decoder with serial input. (29 decoder)
Specification:
- I / O current: max. 10mA per pin.
- PD: 500mW.
- Clock freq. @ VDD = 5V: 1 ?? 240 kHz.
- RC oscillator and internal power-on reset.
- Can be connected to the RF, ultrasonic, or infrared.
- 9 bit parallel output (5 address bits, 4 bits of data).
- Input decoder: serial.
- 5-bit address decode trinary (high, low, open) or binary (high, low).
- 4 decode binary data bits.
- Operating voltage: 4.5 ?? 18 V.

datasheet

Mifare 1K keychain

Contactless/RFID MIFARE keychain , blue color
Specs:
- 1K byte EEPROM.
- Embedded antenna.
- MIFARE 13.56MHz ISD 14443A.
- Range of operation: 0,5" 

Friday, February 24, 2017

Plastic Gear Motor L Set

Plastic Gear Motor L Set is a set of drive wheels for the product DT-Robot Line Follower. The product consists of two wheels, 2 pieces DC Gear Motor and 1 free wheel. Equipped with Gear Box with 90 deg shafts in each respective dc motors, making this product suitable for applications wheeled robot kit.
Equipment:
- Nuts and Bolts 2 mm 2x15 mm.
- Mur 3 mm and 3x8 mm Bolt.
- Motorcycle.
- Bracket.
- Wheel Driving.
- Castor (free wheel).
- Plastic Spacer bolt 28 mm and 3x5 mm.

Thursday, February 23, 2017

PIC18F4550-I/PT microcontroller chip

PIC18F4550-I / PT TQFP44 8-bit microcontroller that inside has been accompanied by a 32 kb memory flassh, 2 kb RAM, 256 bytes of ROM, as well as 10-bit ADC. Besides this microcontroller also supports programming in In-Circuit-Serial-Programming (ICSP) as well as the method is in-circuit-debugging

74LS83 chip

An IC 74LS83 4-bit binary adder which has a fast switching capability.

datasheet

SG3846N chip

Current Mode PWM Controller

Specification:
- Power Supply: 8VDC ?? 40Vdc
- Automatic feed forward compensation
- 200mA totem-pole outputs
- Soft start capability
- Shutdown Capability
- Working frequency 500kHz
- Packaging: 16-pin DIP

7 Segment 0.56inch Red Super Bright Com Anoda

7 Segment size of 0.56 inch single display with a common anode super bright red color.

GP1UE28Q/Y IR Receiver Module Series

Detecting Infrared Remote Control unit for which have similar specifications with GP1UE28Q / Y series Sharp
Specifications according GP1UE28Q / Y:
- Power supply 3,5V DC ?? 5V DC (Tested)
- High level pulse width 1200us (max)
- Low level pulse width 1000US (max)
- Range 36-40 Khz frequency
- Having two types of packaging made of metal

2.4GHz Antenna 3.0dBi Height 110mm Black

Antenna for 2.4GHz frequency in black. This antenna has a male SMA connector types.

Wednesday, February 22, 2017

DDS-3429 red Pushbutton Switch on-off

Red pushbutton configuration with Push ON - OFF Push. Can drain current 3A at 125 VAC or 1A at 250 VAC.

TEMT6000X01 light sensor

TEMT6000X01 (ambient light sensor) is a light sensor which has a small size SMD 1206 and used as a silicon epitaxial planar phototransistor. This sensor is quite sesnitif to visible light as well as on the human eye. The sensitivity of the sensor is +/- 570 nm and works on the principle phototransistor.

specifications:
- Collector-emitter voltage: 6 V
- Emitter-collector voltage: 1.5 V
- Sensitivity: 570 nm (peak wave) \
- Packaging: SMD 1206


Plastic Gear Motor I Set

Plastic Gear Motor I Set is a set of drive wheels for the product DT-Robot Line Follower. The product consists of two wheels, 2 pieces DC Gear Motor and 1 free wheel. Equipped with Gear Box with offset shaft on each individual dc motor, makes this product suitable for applications wheeled robot kit.
Equipment:
- Nuts and Bolts 2 mm 2x15 mm.
- Mur 3 mm and 3x8 mm Bolt.
- Motorcycle.
- Bracket.
- Wheel Driving.
- Castor (free wheel).
- Plastic Spacer bolt 28 mm and 3x5 mm.

datasheet

Tuesday, February 21, 2017

Mini Metal Gear Motor Set

Mini Metal Gear Motor Set is a set of drive wheels for the product DT-Robot Line Follower. The product consists of two wheels, 2 pieces DC Gear Motor and 1 free wheel. Equipped with Metal Gear in each respective dc motors, making this product suitable for applications wheeled robot kit.
Attachment: Mur 3 mm and 3x8 mm bolt, Clamp, Motor, Bracket, Wheel Driving, Castor (free wheel), plastic Spacer bolt 30mm and 3x5 mm.

Resistor 0.05 OHM 5W 1%

5 watt resistor with 0:05 Ohm resistance and tolerance of 1%.

PCA9306D chip

PCA9306D a voltage level translator ICs bi-directional on the I²C bus and SMBus who works at a voltage of between 1.0 - 3.6 V (Vref1) and 1.8 - 5.5 V (Vbias (ref2)).

Specification:
- Type of translation: voltage level
- Channel Type: Bi-directional (two-way)
- Number of Circuits: 1
- Number of Channels: 2 Channels
- VCCA Voltage: 1 V - 3.6 V
- VCCB Voltage: 1.8 V - 5.5 V
- Output Type: Open drain
- Working temperature: -40 ° C - 85 ° C
- Packaging: SOIC-8


MAX829EUKG chip

MAX829EUKG a charge-pump voltage inverter, designed to work at input voltages between 1.5 - 5.5 V and is able to produce output currents of 25 mA. This MAX829EUKG bias can be applied to LCD panels, mobile phones, PDAs, pagers, digital cameras, gaming consoles, and so forth.


Specification:
- Configuration Output: Positive / Negative
- Topology: Charge-pump
- Output Type: Fixed
- Total Output: 1
- Input Voltage: 1.5 -5.5 V
- Flow Output: 25 mA
- Switching Frequency: 35 KHz
- Packaging: SOT-23-5



Led Stripe SMD 3528 Ultra Bright Red

SMD LED stripe light that can emit red light. LED strip is working on a 12 VDC voltage and is perfect when applied as an indoor lighting, shop window decoration, automobile decoration, and so forth.

Specification:
- Working voltage: 12 VDC
- Length: 2 M
- Power Dissipation: 4.8 W
- Flow: 400 mA
- Arc of Light: 50 lm
- Wavelength; 630 (max)
- Beam Angle: 120 degrees

HLW4R-2C7LF FFC / FPC Connectors 4P 1mm RA

Connectors FFC / FPC 4 pin with the type of right angle mounting.

1-5227079-6 CONN BNC PLUG STR 50 OHM CRIMP

A male BNC connector with an input impedance of 50 ohms. This connector is able to operate at a maximum voltage up to 500 V and a maximum frequency up to 4 GHz. This connector is compatible premises cable types RG 174 and RG-188.

Specification:
- Connector Type: BNC
- Form: Male
- Impendasi: 50 Ohm
- Mounting Type: Free-hanging
- Compatibility: RG-174 and RG-188
- Locking type: Bayonet-lock
- Frequency: 4 GHz
- Packaging materials: Brass nickel plated
- Materials Contact: Brass tin plated
- Working Voltage: 500 V (max)

Raspberry Pi Home Remote App Kit

Raspberry Pi Home Remote App Kit is a set of three relay modules and Raspberry Pi ™  with  LAN / WLAN interfaces, which can be controlled by Android ™ gadget.

This kit can be used to control three different electrical appliances. Everything can be controlled from Android ™ app, no longer need to go to a switch to turn it on or off.

Python and Android apps are available in a micro SD card and can be downloaded https://goo.gl/F5n6Q6

Equipment:

  • 1 Raspberry Pi ™ + micro SD card.
  • 1 DT-PROTO Arduino PiShield.
  • 1 EMS Relay Shield.
  • 1 Switching Adapter.
  • Dimensions: 11.73 cm (L) x 6.9 cm (L) x 4.4 cm (T)

Monday, February 20, 2017

DDS-1431 pushbutton switch push off ,green color

Pushbutton green with two feet of the pin. Can drain current at 125 VAC 4A or 2A at 250 VAC.

Relay Board For Raspberry Pi (3 Channel )

3 channel relay module for Raspberry pi that you can use to control various electronic devices voltage / high current carrying. How to use was very easy, you only need to pair this module to the Raspberry Pi GPIO header, after that you can instantly programmed receipts python language. It is suitable for those who want to realize the smart-home use Raspberry pi.

Specification:
- Compatibility: Raspberry Pi A + / B + / 2B / 3B
- Contact Voltage: 250 VAC / 30 VDC
- Flow Contact: 5A
- Dimensions: 6.5 cm x 5.6 cm x 0.5 cm
- Weight: 606 gr
- Equipped with an optocoupler to protect the Raspberry Pi from high voltage interfrensi
- Equipped with LED indicator

Sunday, February 19, 2017

MC34064P-5 chip

Undervoltage Sensing Circuit designed to reset the microprocessor.
Technical specifications:
- Input Operating Voltage (Min) = 1.0 Volt
- Input Operating Voltage (Max) = 6.5 Volt
- Low Standby Current
- Reset Output Capable of sinking in Excess of 10 mA
- TO-226AA Package

Relay 12V and Cable

An SPDT relay with 12 VDC coil voltage, contact current 30 A, and has come with a cable that can facilitate the users in applying this relay into a device. These relays are ideal for applications in industrial control systems and automotive manufacturing.

GD21 Mini Metal Gear Motor 287:1 5V DC with Wheel Package

GD21 Mini Metal Gear Motor 287: 1 5V DC with Wheel Package
Gear motors with metal mini-sized (35mm (L) x 11mm (L) x 10mm (T)) and fitted with acrylic wheels with rubber tires. Wheel diameter of 70mm and 7mm thick.

DDS-1431 push-off pushbutton switch red

Pushbutton-type push off with the color red button

7 Segment 1.5inch Red Super Bright Com Anoda

7 Segment Common anode, the size of 1.5 "with a red light color.

Friday, February 17, 2017

MM74HC08M chip SOIC-14

MM74HC08M a logical AND gate IC with a total of 4 pieces of AND gates and 2 pieces of input lines.

1-Wire® Temperature Sensor Probe

Digital temperature sensor DS18B20 Maxim chip-based sensor that uses 1-wire interface for point data access. Probe on the sensor material is made of rustproof stainless steel with a length of ± 15 cm and can be used to measure temperatures between -55 ° C to 125 ° C. This sensor is perfect when used to measure the temperature of the liquid chemical.

Specification:
- Chip Sensor: Maxim DS18B20
- Working Voltage: 3 - 5.5 V
- Workflow: 1 mA
- Measurement Range: -55 ° C - 125 ° C
- Accuracy: ± 0.5 ° C @ -10 ° C - 85 ° C
- Resolution: 0.0625 ° C (max)
- Material Probe: Stainless steel
- Interface: 1-wire
- Cable length: ± 300 cm
- Long Probe: ± 15 cm

LattePanda 4G/64GB Single Board Computer (Without Win10 License)

LattePanda 4G / 64 GB is a mini PC that has been integrated with the Arduino microcontroller board. Mini PC is capable of running the Linux operating system and Windows 10 that already exist inside Visual Studio, NodeJS, Java, Processing, and more.
Mini PC is powered by an Intel Cherry Trail Z8300 Quad Core 1.8 GHz, 4 GB DDR3L RAM, 64 GB of internal memory, and processor ATmega32u4 aide to function like Arduino Leonardo. In addition, the mini PC is also equipped with WiFi and Bluetooth 4.0 as a means of wireless communication.

Specification:
- Processor: Intel Cherry Trail Z8300 1.8GHz Quad Core
- Default Operating System: Windows 10 (without a license)
- RAM: 4 GB DDR3L
- Internal Memory: 64 GB
- USB: 1x USB 3.0, 2x USB 2.0
- Wireless Communications: WiFi and Bluetooth 4.0
- Processor Assistant: ATmega32u4 (Arduino Leonardo)
- GPIO: 2 GPIO for Intel chips and 20 GPIO for Arduino
- Power Supply: 5V / 2A
- Supported Operating Systems: Windows 10 & Linux
- Dimensions: 2.76 inches x 3:46
- Weight: 101.4 g


ATmega32u4 Specifications:
- Data Bus Width: 8 bit
- Clock Speed: 16 MHz
- Memory flash: 32 kB
- RAM: 2.5 Kb
- ROM: 1 Kb
- Resolution ADC: 10 bit
- Number of ADC Channel: 12
- Working Voltage: 2.7 - 5.5 V
- Interface: SPI, TWI, USART
- Number of I / O: 26 I / O
- Number Timer: 5 Timer

documentation:
http://www.lattepanda.com/docs/

P3A-120704U Case with size 1.22inch x 0.71inch x 0 .40inch

Materials made from ABS plastic and has equipped Slot for a review of USB Type A. dimensions of case 1.22 "x 0.71" x 0 .40 ". Suitable when used for the review to protect electronic circuit . Small size and is portable.

specification:
- Dimensions: 1:22 "x 0.71" x 0 .40 "/ 30.99 x 18.04 x 10.16 mm
- Material: Plastic ABS
- Features: Comes Slot USB type A
- Weight: 2 g

BAT54XV2T1G diode case SOD-523 SMD

These Schottky barrier diodes are designed for high−speed switching applications, circuit protection, and voltage clamping. Extremely low forward voltage reduces conduction loss. Miniature surface mount package is excellent for hand−held and portable applications where space is limited. 
Features 
• Extremely Fast Switching Speed 
• Low Forward Voltage − 0.35 V (Typ) @ IF = 10 mA 
• S Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q101 Qualified and PPAP Capable 
• These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS Compliant

Mounting bracket for AT5/AT5i GPS

A mounting bracket that is compatible with the GPS module and AT5i AT5. Bracket is made of aluminum that is resistant to corrosion / rust.

GT5 Gear Motor

DC motor kit that has accompanied the gear box with a gear box ratio of 1:48. These motors work at a voltage level of 3 V - 7.2 V and is capable of producing a maximum torque of up to 1.5 kg-cm. This bike is perfect when applied to the field of robotics, especially in the field of mobile robots.

Specification:
- Working Voltage: 3 - 7.2 VDC
- Workflow: 160-250 mA
- Speed Round: 120-250 RPM
- Maximum Torque: 0:45 - 1.5 kg.cm
- Comparison Gear Box: 1:48

330nF Ceramic Condensator

Ceramic capacitor with a capacitance of 330 nF and maximum working voltages up to 250 VDC.

HKE HRS2H-S-DC5V-N Dpdt Relay

Relay DPDT with coil voltage of 5 V, contact current of 1 A, as well as contact voltage 120 VAC / 24 VDC. It is suitable when applied to various electronic automation systems.

FDS6890ACT-ND chip

FDS6890ACT is an N-Channel MOSFET in which has been equipped PowerTrench technology that can reduce on-state resistance, so as to improve the switching performance of FDS6890ACT significantly. FDS6890ACT is normally applied to the converter DC / DC and motor drivers.


ZCAT3035-1330 EMI/RFI Suppressors & Ferrites Round

EMI filter diameter 13 mm which serves to reduce the impact of Electromagnetic Interference (EMI) to the electronic circuits, particularly in power devices and radio wave transmitter device.

DIP Socket Machine 18Pin

18 pin DIP socket with the socket holes are round.

Thursday, February 16, 2017

7 Segment Dual Digit 0.56inch Red Super Bright Common Anoda Type G

Dual digit 7 segment display with a size of 0.56 inch. 7 Segment produces red colored light with independent configuration for each digit (common apart from each other).

Wednesday, February 15, 2017

75179BP chip

Differential driver and receiver pair designed RS-422, RS-485, and ITU Recommendation V.11 to improve the performance of full duplex data communication on the long bus lane.

DC Motor 3-6V

Motor DC with working voltage 3 to 6VDC